Being aimed to the irrationality and inadaptability of different calculation methods for wide cantilever plate,study of space numeric simulation analysis about concrete box bridge cantilever plate can be carried out for three dimension solids based on ANSYS.
针对混凝土箱梁悬臂板诸多算法的不合理性,应用大型通用有限元分析软件ANSYS,以三维实体单元对混凝土箱梁悬臂板进行空间数值仿真分析研究。
The nonlinear dynamics of composite laminated cantilever plates subjected to the in-plane and transversal excitations is investigated in this thesis.
本课题主要研究了纤维增强复合材料层合悬臂板的非线性动力学问题,以飞机机翼的颤振为实际工程背景,考虑高阶横向剪切效应和几何大变形,建立了一边固定、三边自由的复合材料层合板在受到面内激励和横向外激励联合作用下的非线性动力学方程,利用多尺度方法和数值方法分析了纤维增强复合材料层合悬臂板的非线性动力学特性。
In this paper,the damping property of a cantilever plate with magnetic rubber layer damping treatment(MRLD) was investigated.
研究了磁橡胶约束阻尼处理(MRLD)悬臂板的阻尼特性。
This paper presents an analysis of the cantilever slab structure on T-shape beam by using finite element spatial program.
通过有限元计算,对T型梁悬臂板结构的受力进行了分析研究,提出悬臂板根部弯矩的影响因素和规律,并运用数理统计方法总结出一些简单实用的经验计算公式,以期对工程设计提供借鉴。
The design and construction of the prestressed cantilever slab in the gymnasium of Handan Steel Corporation are introduced.
介绍了邯郸钢铁公司体育馆预应力悬臂板结构的设计与施工 ,通过采用扁预应力束、施工阶段设置后浇带等技术措施有效解决了悬臂板抗裂设计和支承柱大偏心受压问题。
The internal force distribution in long cantilever slab of box girder is analyzed by the finite element software Ansys.
应用有限元软件Ansys,对箱形梁长悬臂板的内力分布规律进行有限元数值分析,着重研究悬臂长度、泊松比、板厚等参数对悬臂板内力分布规律的影响。
The placement rule of piezosensors and piezoactuators for cantilevered plate is given,and the piezoelectric control equation based on distributed piezoelectric actuators for cantilevered plate including bending and torsion modes is derived,and the control methods can be designed using this equation.
给出了悬臂板的压电敏感器和致动器的布置准则,并推导了悬臂板的(包括弯曲和扭转振动模态)基于分布式压电致动器的压电致动方程,可以根据该方程设计悬臂板压电主动振动抑制的控制器。
Self-shaking and shaking control of pressing cantilever board;
压电悬臂板的自振及振动控制
The paper adopts composites layer board model to analyse functionally gradient materials cantilever board.
本文采用复合材料层合板模型,对梯度功能材料悬臂板进行了分析。
Aimed at the unreasonable calculation methods for cantilever slabs of concrete box girders,based on FEM and some kinds of calculation methods,a analyses is performed by sub-model technique to study the influence of several parameters,such as distortion for box girders,length and degree of slope for cantilever slabs as well as load location.
针对目前混凝土箱梁悬臂板计算的不合理性,以有限元为基础,结合诸多算法,应用子模型技术分析了箱梁畸变、悬臂板长度及坡度、荷载作用位置等参数对混凝土箱梁悬臂板有效分布宽度的影响规律。
Nonlinear Dynamics of Composite Laminated Cantilever Plate
复合材料悬臂板的非线性动力学研究
Studys on Active Vibration Control of Piezoelectric Smart Cantilever Plate
压电智能悬臂板的主动振动控制研究
Shear Strength of R/C Bridge Cantilever Slabs
钢筋混凝土桥悬臂板的剪切强度分析
Finite Difference Analysis on Cantilever Slab Model with Void beneath the Cement Concrete Slab Corner
板角脱空条件下悬臂板模型的有限差分分析
Rigid-Flexible Dynamics Modeling and Vibration Control of Rotating Cantilever Plate with ACLD Treatments;
转动ACLD悬臂板的动力学建模及振动控制
Considering the difference of cantilever plate between the end and the middle of the concrete box bridge, the chief influence factor is studied.
考虑箱梁端部和跨中悬臂板根部的区别，研究了影响变厚度悬臂根部弯矩的主要因素。
Active Vibration Control of Piezoelectric Smart Cantilever Plate and the Optimization of PZT s Locations;
压电智能悬臂板梁振动的主动控制与压电片的优化布置
Cantilever Formwork Construction Technology of Special-shaped Main Tower for Self-anchored Suspension Bridge
自锚悬索桥异型主塔悬臂模板施工技术
The Study and Design of Arm Robot for Hull Shaped Plate Forming by Line Heating;
水火弯板成型单悬臂机器人设计分析
BOUNDARY INTEGRAL FORMULA FOR BENDING OF CLAMPED SEMI-INFINITE PLATE
悬臂半无限大板弯曲的边界积分公式
As an example, the frequencies of a composite laminated cantilever plate are calculated.
作为例题，计算了复合材料悬臂层合板的频率。
THE STUDY OF THE DESIGN THEORY FOR THE CANTILEVER DECK OF SINGLE-CELL BOX GIRDER BRIDGES
单室箱梁桥悬臂行车道板设计计算理论研究
Research on the Reasonable Length of Cantilever of Concrete Box Girder;
混凝土箱梁翼板悬臂合理长度分析研究
Mechanical Behavious & Experimental Analysis of Wide Curved Box-Girder
大悬臂弧线底板箱梁桥受力与试验分析
Research on reinforcement with arch surround and cantilever widening slab arch technology and its practice
套拱加固与悬臂拓宽石板拱桥技术研究与实践
Fourier analysis of bending of orthogonal anisotropic rectangular thin cantilever plate
正交各向异性矩形悬臂薄板弯曲的傅立叶分析
The leaf spring mounted transversally does require additional Bracing; control arms and strut rods are therefore used.
在后悬架系统中,钢板弹簧横向悬挂,需有额外的支撑,因此要使用控制臂和横摆臂。
The department also inspected 960 cantilevered slab canopies and balconies, resulting in the issue of 278 investigation orders.
该署又视察了960个悬臂式平板檐篷和露台，结果共发出278份勘测令。