An expert system for the weld groove design and selection designed with C language is described.
介绍了用Ｃ语言编制的焊缝坡口设计与选择专家系统，用ＡｕｔｏＣＡＤ深入编程方法编制了坡口图形库并设计了向Ｃ语言专家系统传递图形的接口。
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.
在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。
The second crack is a crack originating at the groove weld toe of the column flange-girder flange connection.
第二种是产生于立柱翼缘与主梁翼缘连接处的坡口焊缝焊趾处的裂纹。
Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe
外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响
Research on real-time processing images of non-groove butt weld based on structured light
基于结构光无坡口对接焊缝图像实时处理研究
Study on Groove Shape and the Open Angle of End Tab of UOE Pipe;
UOE焊管坡口形状与引弧板开口角研究
Cracking Analysis of Importation B70 Grade Line Welding Pipe in Cold-bend Test
进口B70级直缝焊管冷弯试验开裂分析
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
TOFD Automatic Ultrasonic Inspection on Site Butt Weld of the Four Exports Separator
四段出口分离罐现场组焊对接焊缝TOFD自动超声检测
DISCUSSION ON PROJECTS OF CONSTRUCTION OF LARGESIZED SUBMERGED ARC STRAIGHT WELD PIPEMILL;
对建设大口径直缝埋弧焊管项目的一点看法
Research on Internal Circumferential Automatic Welding Equipment and Process for Long Distance Pipeline with Big Size
大口径长输管道内环缝自动焊设备及工艺研究
FEM Simulation Research on Large-Sized Straight Weld Pipe's Rounding and Sizing Process
大口径直缝焊管整圆定径工艺数值模拟研究
Numerical Simulation of Rounding-sizing Process of Large-sized Straight Welded Pipe
大口径直缝焊管整圆定径工艺过程的数值模拟
To determine mandril diameter for 48"LSAW pipe
48英寸大口径直缝焊管成形芯轴直径确定
The Solution for Unacceptable LSAW Linepipe End Diameter
大口径直缝焊接钢管管端直径超差的处理方法
Fresh Development of Manufacture Technology and Equipment for Large-sized SSAW pipe
大口径直缝埋弧焊管生产技术与装备的新进展
Add metal from the rod by dipping the end into the pool so that it melts and makes up the vee.
将焊条一端浸入池内熔化，填满V形坡口。
A study of the improvement of the butt weld groove of a boiler set box and pipe
锅炉集箱和管道对接焊坡口的改进研究