Analysis and research on the influence of die material and heat treatment process to die life;
模具材料及热处理工艺对模具寿命影响分析与研究
Effect of heat treatment processing on phases and microstructures of (111) orientation preference Pt films;
热处理工艺对(111)取向Pt薄膜物相与结构的影响
Study of heat treatment process of 1Cr5Mo alloy seamless steel pipe;
1Cr5Mo合金无缝钢管的热处理工艺研究
Effect of heat treatment processing on the microstructure and properties of hot extrusion-deformed FGH95 alloy;
热处理工艺对热挤压变形粉末高温合金FGH95组织与性能的影响
Influence of heat treatment on SA213-T23 weld joint's properties;
热处理工艺对SA213-T23焊接接头性能的影响
Effects of heat treatment on mechanical properties of PC steel bar;
热处理工艺对建筑用PC钢棒强韧性的影响
Effect of heat treatment technology on K_(IC)~J and da/dN of 14Cr1MoR steel;
热处理工艺对14Cr1MoR钢K_(IC)~J和da/dN的影响
The common structural defect of large-scale rudder horn casting steel and its cause of flaw were analyzed,the smelting and heat treatment technology of casting steel was pointed out as well.
分析了挂舵臂铸钢件常见的组织缺陷及产生原因,提出了铸钢件的冶炼及热处理工艺。
Through researching N80Q steel kind and the heat treatment technology,we have successfully developed and produced N80Q grade oil casing which meets the API standard and the user's requirement.
包钢通过对N80Q钢种和热处理工艺的研究,成功地开发生产了性能满足标准要求和用户需要的N80Q钢级石油套管。
This article studies the heat-treatment technology of steel 45 rubber forming dies and the influence of the heat-treatment technology on its microstructure and properties.
主要研究了45钢橡胶成型模具的热处理工艺,以及热处理工艺对其组织和性能的影响。
The 60Si2 Mn steel was selected to investigate the effect of differentoriginal before boronization,different heat-treatment technology after boronization andboronization time on wearability of metals.
研究了60Si_2Mn渗硼不同原始组织、渗硼后不同热处理工艺及不同渗硼时间对材料耐磨性的影响规律，并确定出不同情况下耐磨性最好的工艺规程。
The heat treatment technique for 35CrMo steel to get lath martensite microstrure and the contact fatigue of this lath martensite were researched.
研究了 35Cr Mo钢获得板条马氏体的热处理工艺 ,并对其获得的板条马氏体组织进行了接触疲劳试验 ,结果发现板条马氏体的接触疲劳寿命为调质态的 4倍
The influence of the parameter of heat treatment technique on electromagnetic property of silicon steel slice is inquired into here.
探讨了热处理工艺参数对硅钢片电磁性能的影响。
Study on comparing of heat treatment processing properties of 20CrNi2Mo and 20Cr2Ni4 used in heavy-duty gears;
重载齿轮用20CrNi2Mo和20Cr2Ni4钢热处理工艺性能对比研究
unconventional heat treatment of mould
模具非常规热处理工艺
X20CrMoV121 Fan Plate Heat Treatment Process
X20CrMoV121扇形板热处理工艺
Investigation of Steel 15CrNi3MoA Heat Treatment Process
15CrNi3MoA钢热处理工艺探讨
The Effect of Heat Treatment Technics on the Thermal Fatigue Property of 3Cr2W8V Steel;
热处理工艺对3Cr2W8V钢热疲劳性能的影响
Research of Heat Treament Process Dies Steel;
热作模具钢二次回火热处理工艺研究
Heat Treatment Process for 23-8N Austenitic Heat Resistant Steel
23-8N奥氏体耐热钢热处理工艺研究
Improvement on Heat Treatment of 5CrMnMo Steel Hot Forging Dies
5CrMnMo钢制热锻模热处理工艺改进
Improvement on heat treatment process of hot forging die for diesel camshaft
柴油机凸轮轴热锻模热处理工艺改进
Heat Treatment of H13 Hot Working Die Steel for Die Casting
压铸用H13热作模具钢热处理工艺研究
Heat Treatment of Hot Formed Bend in Low-carbon Steel X52
低碳钢X52热煨弯管的热处理工艺
Heat Treatment Process Research of 18CrNi8 Nozzle;
18CrNi8长型针阀体热处理工艺研究
Study on Multi-element Penetration and Heat-treatment of Copper and Brass;
纯铜、黄铜多元共渗及热处理工艺研究
Study on Heat Treatment and Property of 20CrNi2Mo Steel;
20CrNi2Mo钢热处理工艺及性能研究
Research on Heat Treatment Processparameters of 0Cr12Mn5Ni4Mo3AL;
OCr12Mn5Ni4Mo3AL不锈钢热处理工艺研究
Investigation of Heat-Treatment Process for 20CrMoH Steel Using as Gear;
20CrMoH齿轮用钢热处理工艺研究
Study on the Heat-treatment of ZG0Cr16Ni5Mo Used on Hydraulic Turbine Blades;
水轮机叶片材料ZG0Cr16Ni5Mo的热处理工艺研究
Research on Automobile Gear Steel 20MnCr5 and It's Heat Treatment Technology;
汽车齿轮轮钢20MnCr5及其热处理工艺研究
The Study on Heat Treatment Technology of 55Cr5SiMoVNi Abrasive Cast Steel;
55Cr5SiMoVNi耐磨合金铸钢热处理工艺的研究