The current signals with splash or without splash are processed using cepstrum transform in spot welding,and then the plots of the cepstrum are compared.
飞溅将引起电流信号的异常变化。
Based different dealing ways of voltage and current signals in Siemens analog input modular EM231,two normal signal-proceeding programs are given after the analysis of modular inner proceed procedure in this paper.
针对西门子模拟量输入模块EM231同一端口接受电压信号和电流信号不同方式,分析了EM231内部处理过程中比例斜率的变化,给出了处理电压信号和电流信号的两种通用程序。
This paper introduces that current signals of power system are acquired by Rogowski coil through optical fiber transmission system to low voltage side,which overcome the strong electromagnetic interference between the high-voltage signals,finaly transmission signals are send into the MSP430 to achieve signal measurement and display to improve the accuracy of measurement.
介绍了使用Rogowski线圈采集电力系统中的电流信号及通过光纤传输系统把采集的信号传送到低压侧的设计方案,利用MSP430单片机实现信号的测量和显示,对采用Rogowski线圈的测量方案以及系统设计软硬件的实现方法进行了分析。
This paper introduces a method to inprove the loading capacity by decreasing the working current of detector.
本文从尽可能地减少探测器的工作电流入手 ,来提高二总线火灾报警系统的带载能力 ,达到了预期的效果。
The working current,electromagnetic environment and mechanical strength of tubular busbar are analyzed.
主要从工作电流、电磁环境、机械强度等几方面重点论述,提出特高压换流站直流场母线型式、截面、对地高度方面要求,同时满足经济性和安全性的要求。
The optimal operating current is determined by measuring and analyzing the operating properties of electrodialysers in series connection.
通过对电渗析装置运行性能的测试分析,得出电渗析装置多台串联最佳工作电流,从而以最大限度防止电渗析装置极化结垢。
In this paper, flux distribution and operating current are calculatedaccording to the field coil change in 100 hp class HTS motor.
文章中,磁通量分布和工作电流根据励磁线圈在100hp级电动机中的变化求得。
The influence rule of plasma beam hardening operating current on microstructure and performance on the surface of nodular cast iron was studied.
研究了工作电流对球墨铸铁表面等离子束硬化组织和性能的影响规律。
The ion current contains rich combustion information.
离子电流信号包含了丰富的燃烧信息。
Automatic exchange for voltage and current output.
仪器电压、出电流信号能够自动转换。
Analogue direct current signals for industrial process measurement and control instruments
GB/T3369-1989工业自动化仪表用模拟直流电流信号
The current and voltage signals obtained from current and voltage transformer secondary windings must be restricted to a full scale value6 of + 10 volts.
从电流互感器和电压互感器获得的电流信号和电压信号须限制到±10V的满额值。
Torsional Vibration Measurement Based on Induction Motor Current Signal and Its Application;
基于电机电流信号的扭转振动测量及其应用
amplify the sound, electric current, signal
增强声音、 电流、 信号.
a complete electrical circuit around which current flows or a signal circulates.
电流或信号能够流通的完全电路。
effects caused by AC electric traction system on communication and railway signal equipments
交流电力牵引对通信信号的影响
ringdown signaling
低频监察信号 -用低频电流传送监察信号
The signal consists of surges of electrons or electric current.
该信号是由电涌即电流所组成。
No signal means the solenoid is not energized.
没有信号，意味着电磁阀没有通电流。
With no signal, no current will flow from the battery through the receiver .
如果没有信号,就不会有电流从电池流过接收器。
Ringing and tone for telephone automatic switching network
GB3380-1982电话自动交换网铃流和信号音
("It carries a signal, not a current!"
（他大喊起来："那里面只有信号，没有电流。
Adds a telecommunications symbol to your workflow flowchart.
将电信符号添加到您的工作流程图中。
A Study on the Frequency Spectrum of the 25Hz AC Counting Code Signal
25周交流计数电码信号的频谱分析
Design of aviation AC power supply system signal resource based on SCM
航空交流供电测试系统信号源的设计
Analysis and Disposal of Interference Signal of Current Examination Circuit
电流检测回路干扰信号的分析及处理