Design and application of the circuit for generating 400Hz sinusoidal waveform reference voltage signal;
400Hz正弦波基准电压信号电路的设计与应用
708 V reference voltage in the range of 0.
13μmCMOS工艺设计了一种适合于SOC的低压高精度带隙基准电压源。
Based on demand of precision,it consists of rectifier and filter,sampling and amplifier,comparing and amplifier,adjusting and amplifier automatic and manual reference voltage and so on.
为了确保其高精密度,整流滤波环节采用电感滤波,采样环节使用锰铜电阻作为采样电阻,在基准电压环节中采用精密基准电源SW399、通用运放μA741构成的浮动式恒流源以提高基准稳定性,并在误差比较放大环节中采用PI算法以消除稳态误差。
A voltage reference as low as 18 mV was designed.
给出了低至18 mV的基准电压电路的设计过程和仿真结果,设计了一种基于双极型、互补型、双扩散金属氧化物半导体(BCD)1。
The requirements of higher accuracy and lower quiescent current in the voltage reference circuit of LDO regulator contradict each other.
LDO稳压器对其中的基准电压电路较高精度要求和较低静态电流要求是一对矛盾,本文折衷设计了一款简单实用的CMOS电压基准电路。
The circuit can provide a voltage reference and a current reference with low temperature coefficient simultaneously.
主要介绍了一种新型CMOS基准源电路的设计方法,由NMOS管阈值电压的温度系数及NMOS管迁移率温度指数形成温度补偿,同时产生低温度系数的基准电压和基准电流。
The design and realization of wide input and fast start up high precision voltage reference;
宽输入快速启动的高精度电压基准电路设计
Design of voltage reference circuit in PWM;
一种面向脉宽调制器的电压基准电路
The voltage reference in measuring instrument
测量仪表中电压基准的选择
With the trend of low-power,low-voltage in IC design,conventional bandgap voltage reference will not be the most suitable candidate any more.
设计了一种非带隙结构的电压基准源,并对该基准源作了电源抑制特性的理论分析。
A CMOS voltage reference circuit operate under sub-threshold state has been presented in this paper and analysising the limitation of MOSFET when it works in sub-threshold condition.
文章设计了一种工作在亚阈值状态下的CMOS电压基准源,分析了MOSFET工作在亚阈区的电压和电流限定条件。
Based on the analysis of conventional CMOS bandgap voltage reference,by combining the curvature compensation technique,a lowsupply CMOS bandgap voltage reference circuit,with the use of bulkdriven opamp as the feedback amplifier is proposed.
基于传统CMOS带隙电压基准源电路的分析,结合曲率补偿技术设计了一种带衬底驱动运算放大器的低电源电压的电压基准源电路,主体电路采用电流模式基准源结构,并结合所采用的衬底驱动运放作为基准源的负反馈运放。
The design of one low temperature-shift voltage reference;
一种低温漂基准电压源的设计
The investigation and design of the voltage reference block on the integrated voltage stabilizer;
集成稳压器中基准电压源模块的研究与设计
In order to effectively decrease the power consumption of analog integrated circuits and improve the technology compatibility,a design method of low-voltage low-power consumption voltage reference with fully CMOS configuration is presented based on the MOS transistors in sub-threshold region.
为了有效降低模拟集成电路的功耗,提高工艺兼容性,文中提出了一种全CMOS结构的低电压、低功耗基准电压源的设计方法。
Several Novel Low Voltage Low Power CMOS Bandgap Reference Voltage Source
低压低功耗CMOS带隙基准电压源设计
A simple bandgap voltage reference with high PSRR
一种高电源抑制比的基准电压源设计
A High Performance Voltage Reference Based on BICMOS Technology;
基于BICMOS工艺的高性能基准电压源研究
A Veference Voltage Circuit Design on BiCMOS Technology
基于BiCMOS工艺的带隙基准电压源设计
Design of a Bandgap Reference for LDOs
一种基于LDO稳压器的带隙基准电压源设计
Design of a Novel No-resistor Voltage Refrence Circuit
一种新颖不带电阻的基准电压源电路设计
A high-performance CMOS Bandgap Voltage Reference Design
一种高性能CMOS带隙基准电压源设计
Low Power and High PSRR Voltage Reference
一种低功耗高PSRR的基准电压源
A Curvature-Compensated Bandgap Voltage Reference Source with High PSRR
采用曲率补偿的高PSRR基准电压源
Super Performance BiCMOS Band-Gap Voltage Reference
一种高性能的BiCMOS带隙基准电压源
A Bandgap Voltage Reference with High Power Supply Rejection Ratio
一种具有高电源抑制比的带隙基准电压源
Realization and Design of a Band-Gap Reference Voltage Based on Low Dropout Voltage Regulator;
一种基于LDO带隙基准电压源的设计与实现
Reference Voltage Based on Bandgap Reference for Accelerometers
用于加速度计基于带隙基准电压源的设计(英文)
Low voltage high PSRR band-gap voltage reference
低电压、高PSRR的带隙电压基准源
Design of Voltage Reference Based on CMOS Threshold Voltage
基于CMOS阈值电压的基准电路设计
Design of voltage reference circuit in PWM
一种面向脉宽调制器的电压基准电路
A body-driven sub-lv low voltage bandgap reference
一种体输入式1V低电源电压带隙基准电路
The basic standard for low-voltage apparatus
GB/T1497-1985低压电器基本标准