WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
Improvement of fatigue strength of Q235 steel welded joint by modification of flame spray fusion;
火焰喷熔修形法提高Q235钢焊接接头疲劳性能的研究
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
Influence of spraying distance of ceramic soft wire flame spraying on properties of layer;
陶瓷软线材火焰喷涂距离对涂层性能的影响
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
Ni60+WC clad layers on the 45 steel substrate were produced by l aser cladding and flame spray-welding,respectively.
分别采用激光熔覆与粉末火焰喷焊两种技术在45钢基体表面制备Ni60+20%WC合金涂层,比较其组织结构和性能。
TiC-TiB_2 multiphase ceramic coatings prepared by reactive flame spray;
TiC-TiB_2复相陶瓷涂层的反应火焰喷涂制备
Polyamide 1010(PA1010)/nano-ZrO2 composite coating was prepared by flame sprayed.
利用火焰喷涂法制备了尼龙1010(PA1010)/n-ZrO2复合涂层,采用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
Polyamide12(PA12) and PA12/nano-SiO_2 composite coatings were prepared by flame spray.
采用火焰喷涂法制备了聚酰胺12/纳米SiO2(PA12/nano-SiO2)复合涂层,利用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
Study on Wear Resistance of Tillage Stubble Machine Chopper with Flame Powder Spraying and Welding;
根茬还田刀具火焰喷焊耐磨性强化研究
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
Influence of Adding Re-melting on Porosities of Spray-welding Coating on Titanium Alloys Surface and Cause of Porosities
钛合金表面火焰喷焊涂层中气孔的成因及增加重熔对气孔的影响
The Application of Flame Spray Welding Technology in CSP Running Table
火焰热喷焊技术在CSP输送辊道上的应用
Flames jetted out (of the nozzles).
火焰（从喷嘴中）喷出来了.
Powder flame spray and spray fusig gun,with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder.
粉末火焰喷涂喷焊设备，配有各种粉末喷嘴，能喷涂金属微细粉末和氧化物涂层。
volcano spout flame and lava
火山喷出火焰和岩浆
A volcano shoots out flame and rocks.
火山喷出火焰和岩石。
The fire sent up spurts of flame.
大火喷出一股股火焰。
A volcano spouts flame and lava.
火山喷出火焰和岩浆。
The volcano vomited flames and molten rock.
火山喷出了火焰和熔岩。
A portable apparatus that produces a very hot flame by the combustion of gases, used in welding and construction.
喷枪燃烧气体产生大量火焰的一种可携式装置，用于焊接或建筑
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder.
粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
a hot flame will make the solder run.
热的火焰使焊料融化
effect of rocket exhaust on radio wave propagation
火箭喷焰电波传播效应
oxygen-acetylene flame spraying coating
氧－乙炔火焰喷涂涂层
Flames were shooting up from the roof of the building.
火焰正从屋顶上喷出来。