Solidification Behavior of Atomized Droplet during Spray Forming;
喷射成形过程中雾化熔滴的凝固行为
Welding arc and droplet transfer control of VP PMIG
VP PMIG焊接电弧及熔滴过渡控制
It introduces the influence of the forces of droplet,the surface tension,the electromagnetic pinch,gravitation and viscosity etc on short-circuit transition,the mechanism of spatter in CO_2(carbon dioxide)short-circuit arc welding and the influence of electrical parameter on the spatter.
介绍了CO2短路过渡熔滴的重力、表面张力、电磁收缩力、气体爆破力、粘滞力的特点及对短路过渡过程的影响。
Influence of Technical Parameters on Droplets of TiAIN Coating Deposited by Multi-arc Ion Plating;
多弧离子镀TiAlN涂层熔滴工艺参数的影响
Influence of DC pulse-bias on growing processes and droplets of TiAlN/TiN coating;
脉冲偏压对TiAlN/TiN多层膜生长及熔滴的影响
The results indicate that a small amount of PA5935 dosaged into PET improved its antidripping and charring properties,but its oxygen index and tensile strength decreased.
将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
Analysis of stability in droplet transfer process of GMAW based on self-correlation;
GMAW熔滴过渡过程稳定性自相关分析
Influence of parallel waveform control on arc welding droplet transfer;
并联式波形控制对熔滴过渡的影响
Research on arc shape and droplet transfer behavior of flux cored arc welding;
药芯焊丝电弧焊电弧形态与熔滴过渡行为的研究
SEM graphs of residue of treated and untreated nylon-66 fabric show that IFR could promote formation of residual char which could improve the anti-dripping property to nylon-66 fabric.
本研究采用包括聚磷酸铵,三聚氰胺和季戊四醇的膨胀阻燃体系对尼龙66织物进行阻燃后处理,结果表明阻燃体系有效阻止了尼龙66织物的熔滴现象;采用极限氧指数测试和垂直燃烧测试对样品进行燃烧性能的测试,结果表明经此膨胀阻燃体系处理的织物具备了抗熔滴性且氧指数最高可达27。
The ESR process consists of three stages: 1) Formation of dropets on the electrode tip;
电渣重熔有三个阶段:1.电极端头熔滴形成期;
Effect of Droplet Transition on Rapid Prototyping by P-MIG
熔滴过渡对脉冲熔化极氩弧焊快速成形的影响
Research of GMAW-P Droplet Transfer Cooperated Control
GMAW-P焊熔滴过渡协同控制的研究
Mechanics of drop transfer for high-current density MAG welding process
细丝大电流MAG焊的熔滴过渡机制
The Mechanism of Drop Transfer During Rotating Spray Transfer Controlled by Longitudinal Magnetic Filed
磁旋弧MAG焊接工艺的熔滴过渡机制
Effect of Droplet on High Cycle Fatigue Property of TB6 Titanium Alloy
熔滴对TB6钛合金高周疲劳性能影响
Waveform Control in Droplet Transfer Phase During Pulsed MIG Welding
脉冲MIG焊熔滴过渡阶段的波形控制
Welding arc and droplet transfer control of VP PMIG
VP PMIG焊接电弧及熔滴过渡控制
Key parameter measurement system for molten micro-droplet in uniform droplet spay forming
均匀液滴喷射成形中微熔滴关键参数在线检测系统
Machine Vision Recognition and Analysis for Aluminum Alloy MIG Welding Pool and Metal Transfer;
铝合金MIG焊熔池与熔滴过渡信息视觉检测与分析
Modeling of droplet transfer electrical characteristics in pulsed gas melted arc welding
脉冲熔化极气体保护焊熔滴过渡电信号特征及建模
The relationship between droplet transfer and operation perfrmance of self-shielded flux-corde wire( SSFCW) is studied.
研究了熔滴过渡形态和焊丝工艺性能的关系。
Analysis of Droplet Transfer Behavior in CO_2 Laser-MIG Hybrid Welding Process;
CO_2激光-MIG复合热源焊接熔滴过渡的行为分析
The Study on Metal Transfer and Operation Performance of Rutile Gas Shielded Flux-cored Wire;
钛型气保护药芯焊丝熔滴过渡及其工艺性研究
The Droplet Transition in Rapid Prototyping by P-MIG of Al-alloy;
铝合金P-MIG电弧快速成型的熔滴过渡研究
Study on the Characteristics of Welding Arc and Mechanism of Metal Transfer in Longitudinal Magnetic Field;
磁控焊接电弧特性和熔滴过渡机理研究
Study of Droplet Transfer and Formation s Experiment of Welding Joint in Plasma-MIG Welding;
Plasma-MIG焊接熔滴过渡及焊缝成形的实验研究
The Preliminary Analysis for Droplet Transfer and Weld-bead Undercutting in GMAW;
GMAW熔滴过渡及焊道咬边成形缺陷的初步分析