A nanostructured surface layer was fabricated on a magnesium alloy AZ91D by using a surface mechanical attrition treatment(SMAT)technique.
采用表面机械研磨(SMAT)技术在AZ91D镁合金上制备出纳米晶结构表层,利用X射线衍射(XRD)仪、透射电子显微镜(TEM)及高分辨透射电子显微镜(HRTEM)研究由表层沿厚度方向的组织结构变化特征。
A nanostructured surface layer was obtained by surface mechanical attrition treatment(SMAT).
表面机械研磨处理可以使工业纯钛形成纳米表面层,通过扫描电镜、透射电镜和高分辨电镜观察SMAT处理后的工业纯钛表层组织,并研究了工业纯钛表面纳米化机制。
In this paper the welded joints of X80 pipeline steel are treated by surface mechanical attrition treatment(SMAT)technique,and the surface layer is characterized by means of OM,XRD and TEM.
采用表面机械研磨处理(SMAT)技术对X80管线钢焊接接头进行了表面自身纳米化处理。
The microstructure in the surface layer of a pure iron plate was refined to the nanometer scale by means of a surface mechanical attrition treatment(SMAT)that would generate repetitive severe plastic deformation to the surface layer.
通过表面机械研磨处理技术,在纯铁表面引入大量的塑性变形,导致其表层晶粒细化至纳米量级。
Surface nanocrystallization of 316L stainless steel was realized by using surface mechanical attrition treatment (SMAT).
对316L不锈钢进行表面机械研磨处理(SMAT),研究表面组织变化对其硬度和在0。
Naonstructured layer was synthesized on 316L stainless steel by surface mechanical attrition treatment (SMAT).
采用表面机械研磨处理(SMAT)在316L不锈钢上制备出纳米结构表层,研究表层纳米化组织的腐蚀性能。
Mechanism of Surface Nanocrystallization of Titanium during Surface Mechanical Attrition
表面机械研磨工业纯钛表面纳米化研究
Characterization of Microstructural Parameters of Pure Iron after Surface Mechanical Attrition Treatment
纯铁经表面机械研磨处理后微结构参量的表征
Investigation of Alloying Method of Pure Iron Subjected to Surface Mechanical Attrition Treatment
纯铁表面机械研磨Fe-Ni合金化方法的研究
Microstructure and Properties of Zr-4 Alloy after Surface Mechanical Attrition Treatment
表面机械研磨处理后Zr-4合金的组织与性能
Microstructure and Hardness of Pure Aluminum Surface Nanocrystallization after SMAT
纯铝表面机械研磨纳米化后的显微组织和硬度
Effect of surface mechanical attrition treatment on plasma nitriding behavior of H13 steel
表面机械研磨处理对H13钢离子渗氮行为的影响
Research on Ionized Boronizing with Glow Discharging Heating of Low Carban Steel after Surface Mechanical Atrrition Treatment;
表面机械研磨处理后低碳钢辉光膏剂等离子渗硼的研究
Influence of Surface Mechanical Attrition Treatment on Microstructure and Properties of X80 Pipeline Steel Welded Joints
表面机械研磨处理对X80管线钢焊接接头组织与性能的影响
Effect of annealing on property of 316L stainless steel nanocrystallized by surface mechanical attrition treatment
退火对表面机械研磨处理纳米化316L不锈钢性能的影响
Microstructure and Properties of Surface Nanocrystallized CP-Ti Processed by SMAT;
机械研磨工业纯钛表面纳米化与组织性能研究
Fabrication of Aluminum with Porous Surface by Mechanical High-energy Ball Milling
机械高能球磨法制备表面多孔金属铝
Study on Structure, Mechanical Attrition Pickling and Acid Free Scale Removal of Oxide Scale Formed on Hot-rolled Steels;
热轧碳钢表面氧化皮结构、机械研磨酸洗及无酸酸洗研究
Mechanical graining: Mechanically roughening the surface of a metal sheet by means of abrasive powders, sand bursting, etc, for use as an offset plate. See Graining.
机械磨版:用磨擦粉剂，喷沙等机械方法把金属片的表面造成粗糙，适合为柯式印刷。参阅磨版。
The science of the mechanisms of friction, lubrication, and wear of interacting surfaces that are in relative motion.
摩擦学研究处于相对运动中的相互作用的表面的摩擦，润滑和磨损等机械装置的科学
The Study of Lapping Mechanism and Surface Quality on Lapping of Solid Abrasive;
固着磨料高速研磨机理及工件表面质量的研究
Best surface finish is provided by machining methods, especially by grinding.
用机械加工方法，特别是用磨削方法，可以获得最佳表面光洁度。
Study on Removal Mechanism of Ductile-Mode Grinding in 300mm Silicon Wafer Surface Grinding Process
300mm硅片表面延性磨削机理研究
The Research on Mechanical Surface Treatment and Laser Alloying of Titanium;
钛表面机械强化及其激光合金化研究