Effects of alloying elements on hot tearing trends of Al-Cu alloy;
合金元素对Al-Cu合金热裂倾向的影响
Resolution of Hot Tearing and Distortion for Long and Thin Castings in Investment Foundry;
细长件熔模铸造热裂及变形缺陷问题的解决
Increasing Al content decreased the hot tearing susceptibility of Mg-Al binary alloys rema.
增加Al含量时,可以显著降低Mg-Al二元合金的热裂倾向,提高α-Mg基体的显微硬度。
The effects of Sb and Bi on the hot cracking tendency of casting Al-Cu alloys;
Sb和Bi元素对铸造铝铜合金抗热裂性能的影响
The effects of rare earths and strontium composite additions on the microstructure,mechanical properties and hot cracking resistant property of AM60 magnesium alloy were investigated.
稀土、锶复合添加对AM60镁合金组织、力学性能和抗热裂性能的影响的研究结果表明,往AM60镁合金中添加稀土后,稀土与合金中的异质形核核心Al9Mn11相或Al(8Fe,Mn)5相反应生成Al-RE-Mn三元相,减少了合金熔体中异质形核核心的数目,从而引起了合金晶粒粗化。
A new type of multi-function system for testing linear shrinkage, stress and hot cracking of casting alloy is introduced in the paper.
介绍一种新型铸造合金线收缩-应力-热裂特性综合测试系统。
Effects of Die Structure on Hot Tear Tendency of Al-Cu Alloy in Squeezing Casting;
模具结构对挤压铸造Al-Cu合金热裂倾向的影响
Hot Tearing Behavior Testing of Mg Alloy;
镁合金的热裂行为测试研究
Research Development of Hot Tear Mechanism for Cast Alloys;
合金的热裂机理及其研究进展
Effects of Si on Hot Crack Behavior of 6082 Alloy;
Si含量对6082合金热裂行为的影响
Effects of Electric Pulse Moeification on the Hot Cracking Tendency of Al-5Cu Alloy;
电脉冲孕育处理对Al-5Cu合金热裂的影响
Hot crack numerical simulation has been handled by 'solidification-feeding' model based on temperature field.
本文使用基于温度场的凝固补缩模型来进行热裂纹数值模拟。
Thermal and Catalytic Pyrolysis of Waste Tires;
废旧轮胎热裂解与催化裂解行为研究
Research on Biomass Flash Pyrolysis and Utilization of Pyrolysis Products;
生物质热裂解实验研究及热裂解产物利用
EXPERIMENT OF AQUATHERMOLYSIS REACTION BETWEEN HEAVY OIL AND OVER-HEATED STEAM
过热蒸汽与稠油之间的水热裂解实验
The Design and Study of Biomass Pyrolysis Carrier Heating Device;
生物质热裂解热载体加热装置的设计与研究
Comparative Analysis on Techno-economy of Two Olefin Production Processes-Naphtha Catalytic Cracking and Steam Thermo Cracking;
催化裂解与蒸汽热裂解制烯烃技术经济分析
Experimental Studies on Biomass Pyrolysis Mechanism for Bio-oil and Design of Fluidized-bed Flash Pyrolysis Facility;
生物质热裂解制油机理试验研究及流化床闪速热裂解装置设计
Heat Transfer Model and Experimental Research on Biomass Fast Pyrolysis and Liquefaction;
生物质快速热裂解液化传热模型与试验研究
Study on Coke Inhibition Techinques in Pyrolysis of Endothemic Fuels under Supercritical Conditions;
吸热燃料超临界热裂解过程抑焦技术研究
Evolved Behavior Analysis of Thermal Decomposition for Cigarette Paper by TG-MS
热重质谱法研究卷烟纸热裂解物的逸出行为
nitrate cracking
热硝酸盐应力腐蚀开裂
Crack Analysis in Heat Treatment of Cr12MoV Convex Mold;
Cr12MoV凸模热处理裂纹分析
the crackling or breaking up of certain crystals when they are heated.
某些晶体在被加热时爆裂或破裂的声音。
Experimental Research on Crack arrest Using Electromegtic Heating in a Side-crack Under the Action of Mechanical Loading
机械载荷作用下单边裂纹电热止裂的实验研究
The Analysis on the Crack Arresting by Using Electromagnetic Heating Effect;
电热止裂相变应力及止裂效果综合分析
Cracking Analysis and Safty Evaluation of Hot-Wall Hydrogenation Reactors's Nozzle's Crack;
热壁加氢反应器接管裂纹断裂与安全评价研究
Research on the Spatial Crack Arrest in Metal Component by Using Electromagnetic Heating;
金属构件中空间裂纹电磁热止裂技术的研究
Crack Arrest of Half-embedding Cracks of In-service 45 Steel Component by Electromagnetic Heating
在役45钢构件半埋藏裂纹的电磁热止裂
The thermal cracking threshold of fine sandstone is determined primarily.
实验初步确定了细砂岩的热破裂阈值及其热破裂规律。