Formulating of recipe for increasing tear strength of low hardness silicone rubber;
提高低硬度硅橡胶撕裂强度的配方设计
The test of the water sorption, the water solubility and the tear strength of SY-1 and MDX4-4210 silicon rubber;
SY-1及MDX4-4210硅橡胶吸水率溶解率撕裂强度的对比测定
In this paper,we will take tear strength for example to discuss this correlation.
物理性能参数间存在着相互关系,该文将以撕裂强度为例对其进行探讨。
Study on the relation between nonuniform structure and tearing strength of PP geotextiles;
丙纶长丝土工布结构不匀与撕裂强度关系的研究
The standard methods for measuring tensile strength and tearing strength,which are important parameters for leather,was introduced in this paper,and the influence of different raw skins on tensile strength and tearing strength for different leather was also discussed.
成革抗张强度和撕裂强度是表明成革质量好坏的重要指标。
Effects on yield strength and elongation ratio, rupture strength and elongation ratio and tearing strength were studied.
对屈服强度及伸长率、断裂强度及伸长率以及撕裂强度等力学性能的研究发现 :在相同长径比及其分布情况下 ,与传统混合法则不同的是屈服强度和伸长率不相等 ,也不是只取决于短纤维的直径 ,而是受直径和长度的共同作用 ;在相同的纤维体积分数时 ,复合材料的断裂强度基本相同 ,而断裂形变和撕裂强度随纤维直径的减小而增
R and high frost - line in order to make the films have proper longitudinal tear strength ( MD) and horizontal tear strength (TD).
试验发现:为保证合适的薄膜纵向撕裂强度和横向撕裂强度,应在高牵引速度、大吹胀比和高起霜线的条件下进行该树脂的加工。
die C tear strength
撕裂强度（直角形）
Elmendorf test
埃罗门多撕裂强度试验
Rubber and plastics-Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T12833-1991橡胶和塑料撕裂强度及粘合强度多峰曲线的分析方法
Statistical Analysis of Relationship Between Tensile Strength,Tear Strength and Elongation
数学分析皮革抗张强度、撕裂强度和伸长率之间的关系(续)
" Rubber, vulcanized-Determination of tear strength (trouser, angle and crescent test pieces)"
GB/T529-1991硫化橡胶撕裂强度的测定(裤形、直角形和新月形试样)
" Rubber, vulcanized-Determination of tear strength of small test pieces (Delft test pieces)"
GB/T12829-1991硫化橡胶小试样(德尔夫特试样)撕裂强度的测定
However, if the yarns are packed too tightly, the fabric will have reduced tearing strength, abrasion resistance and wrinkle recovery.
但是,如果纱线密度过大,织物的撕裂强度、耐磨强度及折皱恢复能力会降低。
Compared with conventional polyethers, they show wider practicability, stronger tear resistance, better deflection and elongation rate.
与普通聚醚相比，其实用性广，撕裂强度、扰曲性和伸长率等性能的提高尤为突出。
Compared to tear resistance and tensile strength, fracture toughness is more dependent on fiber length.
断裂韧性对纤维长度的依赖性比撕裂和抗张强度大。
Edge tearing resistance: Resistance of paper to develop an edge tear.
纸边抗撕度:纸张边缘对形成撕裂缺口的抗力。
Paper-Determination of tearing resistance
GB/T455.1-1989纸撕裂度的测定法
Paperboard-Determination of tearing resistance
GB/T455.2-1989纸板撕裂度的测定法
Elmendorf tear tester
厄尔门道夫撕裂度测定仪
Elmendorf tearing tester
爱尔门道夫式撕裂度测定仪
The impact of humidity and tearing on the breaking load of gypsum plasterboard
湿度和撕裂情况对纸面石膏板断裂荷载的影响
The force, in gram, required to tear the paper eo a certain length gives the edge tearing strength.
撕到一定长度所需的力量，以克表示，就是它的纸边撕裂度。
Cutting an edge on paper and theb apply a tearing force.
纸边撕裂度:事先在纸张上切一小口，然后用力撕开。
crossbreaking strength
横断裂强度, 挠曲强度