Application of leveler M in cotton and polyamide fiber dyeing;
匀染剂M在棉、锦织物染色中的应用
Applied practice of leveler AR in reactive dyeing;
活性染料匀染剂AR应用实践
Role of mordant in dyeing of natural dyes for wool;
媒染剂在天然染料对毛织物染色中的作用
,bath pH and mordant dyeing conditions.
结果表明:指甲花用量5%,染浴pH为4,80℃染色为宜;用铝盐或铁盐作媒染剂可提高染色深度和染色牢度。
Selection of leveling agent for nylon dyeing;
锦纶染色中匀染剂的选用
The level-dyeing property of leveling agent on polyamide fabric;
锦纶染色匀染剂的匀染性
Novel high temperature leveling agent WYR-1 for polyester was developed with sodium dodecyl benzene sulfonate, polyethenoxy ether dodecyl sodium sulfate, polyoxyethylene(7) glyceryl cocinin and the surfactant WYR made by researchers themselves.
采用十二烷基苯磺酸钠、十二烷基聚氧乙烯醚硫酸钠、聚氧乙烯(7)甘油椰油酸酯及自制表面活性剂WYR研制了新型涤纶高温匀染剂WRY -1。
Dyes, discharge agent, and other additives, thickeners etc.
详细回顾了拔染印花技术,介绍了拔染印花中所用染料、拔染剂、其它添加剂和增稠剂等助剂及新型的拔染技术,重点介绍了各种拔染剂的性能、应用特性和拔染原理。
Tin compound ZSD is prepared with stannous chloride modified with discharge agent ST-2,its application to polyester discharge printing is carried out.
合成了拔染剂ST-2,用其对氯化亚锡改性后制成加工锡ZSD,应用于涤纶雕印工艺中。
The process recipe and parameter control in indigo dyeing ground and pigment discharge printing were introduced,that is reduction 40~50 min at atmospheric temperature,pH value 10~12,85 % sodium hydrosulfite 6 g/L,discharge agent BT-100,fixation 150 ℃×40 s.
介绍了靛蓝染底和涂料拔染印花工艺处方、参数控制,即常温下还原40~50 m in,pH值在10~12,85%保险粉6 g/L,拔染剂选择BT-100,固色150℃×40 s;指出了操作注意事项。
Development of levelling agent for vat dyes and cationic dyes;
还原/阳离子染料用匀染剂研究进展
Development of levelling agent for disperse dyes and reactive dyes;
分散/活性染料用匀染剂研究进展
To make use of the differences of activity and stability between KN type and K type reactive dyes,the resist agent HWS,which can react on KN type dye and cannot react on K type dye,is selected,so as to prevent KN type dye combining with the fiber.
利用KN型与K型活性染料的活性和稳定性不同,选用能与KN型反应,而不与K型活性染料反应的防染剂HW S,防止KN型染料与纤维结合,起到防染作用。
In order to solve the problems existed in reactive printing, pigment resist printing on reactive dyed ground is carried out with resist agent of white pigment or ammonium sulfate.
为了解决活性印花过程中第三色、传色和对花难度大等问题 ,采用以罩印白和硫酸铵为防染剂的涂料防印工艺 ,总结了各工序的注意事项。