Influence of radial crack on vibrational frequencies of thin circular plate clamped on edge;
径向裂纹对周界固定薄圆板振动频率的影响
Scattering of SH-Wave by an Interface Cylindrical Elastic Inclusion with Diametrical Cracks;
含有径向裂纹的界面圆形弹性夹杂对SH波的散射
The inner layer( S3) of secondary wall is absent, the outer( S1+ S2) is wider than normal and the middle layer shows many radial discontinuities.
从径向切面或切向面看，在管胞次生壁上常具有明显的螺纹裂隙。
Elastic-Plastic Finite Element Analysis for Unequal-Diameter Tee Joint with Axial Through-wall Cracks at the Shoulder
焊制异径三通肩部轴向穿透裂纹弹塑性有限元分析
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
The smaller the curvature and the larger the crack length the smaller will be the fracture stress.
曲线半径越小，裂纹长度越大，断裂应力也就越低。
(2) The method which used to build the unequal-diameter tee joint with axial through-wall crack has been established.
(2) 确定了肩部含轴向穿透裂纹焊制异径三通有限元模型的建立方法。
High environment humidity increases the susceptibility to hy-drogen induced cracking and stress corrosion cracking.
高湿度能增大氢致裂纹和应力腐蚀开裂倾向。
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
Cracks grow in directions nearly parrallel to the surface.
裂纹在近乎平行于表面的方向上生长。
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
Analyses of cause for transverse cracks on CC slab surface
连铸板坯表面横向裂纹产生原因分析
Analysis of Fundamental Frequencies of Rotating Shafts with Transverse Crack;
含横向裂纹的转动轴的振动基频分析
Analysis on Performance of Axial Throughwall Crack Pipeline Repaired by Sleeve
轴向穿透裂纹管道套管修复性能研究
Analysis on the vibration characteristics of cracked beams subjected to axial force
轴向压力影响下裂纹梁振动特性分析
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
Judge of Transverse Crack of Thick-Walled Seam by Ultrasonic Testing Method
厚壁焊缝横向裂纹的超声波判别方法
EFFECTS OF LOAD PARALLEL TO THE CRACK ON THE FATIGUE CRACK PROPAGATION RATE
平行于裂纹方向的载荷对于疲劳裂纹扩展速率的影响
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型