Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
The procedure welding alloy clad steel plate is different from welding solid metal.
焊接复合钢板时,对焊接接头的坡口形式有特殊要求,若坡口形式不当,当先焊接基层时,焊缝金属中可能熔入复层合金元素导致基层焊缝脆化;当先焊接复层时,焊缝金属中可能熔化基层使焊缝金属稀释,降低复层的耐蚀性。
The particularity of welding technology of clad steel plate is due of the difference of the chemical composition of the clad steel plate and experimental results show that the welding sequences and the selection for the welding consumables will depend on the approachable side as well as the plate thickness of clad steel plate.
由于复合钢板化学成分的差异,决定了复合钢板焊接工艺的特殊性。
Mainly demonstrates the welding of 15CrMoR(H)+0Cr18Ni10Ti compound steel plate,thermal pressing of its head as well as the recovery of its mechanical properties.
主要阐述15CrMoR(H)+0Cr18Ni10Ti复合钢板的焊接、封头的热压成形及其力学性能恢复。
Mechanical properties and microstructure of 65Mn/Q235 composite steel plate for centrifugal casting;
65Mn/Q235离心铸造复合钢板力学性能及微观组织的研究
This paper illustrates the weldability of composite steel plate.
分析了复合钢板的焊接性,确定了焊接工艺参数,经实际应用,能够获得满意的焊接质量,满足设计规范要求。
The production of composite steel plate and strip plays an important role in steel plate production.
复合钢板钢带的生产在板材生产中占有重要地位。
Deformation Induced In Situ Composite Plate Manufactured by Cold Rolling with Multiple Pass;
多道次冷轧法制备内生复合钢板
Through an analysis of suspicious image in the X ray film, combine the forming process of the explosive welding stainless complex steel plate, utilize the method of metallographic examine , harmless measure , analysed by strength etc.
通过对X射线底片中可疑影像的分析,结合爆炸焊不锈复合钢板的成型过程,利用金相检验、无损检测、受力分析等方法,确定这一影像为爆炸焊不锈复合钢板结合面产生的裂纹。
The standard of JB4733-1996 Explosive Welding Stainless Complex Steel Plate for Pressure Vessel, rules that explosive welding stainless complex steel plate must be heat treated before delivery only.
JB4 733— 1996《压力容器用爆炸焊不锈钢复合钢板》标准只规定了爆炸焊不锈钢复合钢板须经热处理后交货 ,通过力学性能、金相试验分析 ,证明了爆炸焊不锈钢复合钢板正火后的各项性能均优于退火状态 ,因此 ,爆炸焊不锈钢复合钢板应经正火热处
Two-layer complex steel plate is composed of basic layer and conpound layer.
复合钢板是一种由基层钢板和复层钢板复合而成的双层金属钢板,文章针对复合钢板设备制作加工过程中常见的裂纹问题,从加工顺序、焊接工艺、坡口形式等方面分析了原因,并提出了解决的办法。
Stainless steel clab plates and strips
GB/T8165-1997不锈钢复合钢板和钢带
Complex Techniques Research for SA240 347+ SA387Gr.11CL.2 Compound Steel Plate Explosive Welding
SA240 347+SA387Gr11 CL2复合钢板爆炸复合工艺研究
Specification for welding of stainless steel clad steel plate
GB/T13148-1991不锈钢复合钢板焊接技术条件
The characteristics and status quo on domestic and foreign metal clad sheet were briefly enumerated.
简要列举了复合钢板的主要特性以及国内外复合钢板的现状。
This article mainly deals with the welding technology of stainless composite steel plate.
主要阐述不锈复合钢板的焊接技术。
Method for ultrasonic testing of clad steel plates
GB/T7734-1987复合钢板超声波探伤方法
Technological Test in 14Cr1MoR+410S Multiple Steel Plate Welding;
14Cr1MoR+410S复合钢板的工艺试验
INVESTIGATION ON PROPERTIES OF 321-Q370q CLAD STEEL PLATE USED IN RAILWAY BRIDGE
铁路桥梁用321-Q370q复合钢板性能研究
Welding Technology of Stainless Compound Steel Plate in Petrochemical Installation
石油化工装置不锈钢复合钢板的焊接工艺
Increasing roughness of steel sheet surface is suitable for erichsen test of the laminated steel sheet.
提高钢板表面粗糙度，有利于改善复合钢板的 杯突成形性。
Titanium clad steel plate
GB/T8547-1987钛-钢复合板
Titanium clad stainless steel plate
GB/T8546-1987钛-不锈钢复合板
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
Cold rolled stainless steel clad sheets and strips
GB/T17102-1997不锈复合钢冷轧薄钢板和钢带
Research on Semisolid Casting-rolling Bonding of Steel-backed Al-28Pb Bonding Plate;
钢背Al-28Pb复合板半固态铸轧复合研究
Development And Prospect Of TISCO.Stainless Chd Steel Slab
太钢不锈钢复合板生产发展及展望
Study of the TA1/Q235 clad plate's interface structure and bonding characteristics
TA1/Q235钢复合板界面结构与结合特性
Simulation and Parameter Analysisi of Hot Compounding Rolling of Stainless Clad Plate;
不锈钢复合板热轧复合仿真及参数分析