The key finishing procedures of cattle shoe upper leather were introduced,such as corrected grain leather,nappa leather,pulling up leather etc.
主要针对牛鞋面革中的修面革、纳帕革、油面革等品种,在涂饰过程中的主要操作进行了介绍。
The method of finishing of the cobweb cracked effect leather in the condition high temperature was studied.
系统地研究了高温蜘蛛网龟裂效应革涂饰方法。
The properties of a series of waterborne polyurethane finishing agents were measured and analyzed.
对几种水性聚氨酯涂饰剂的性能进行了多方面的测定分析,包括聚氨酯涂饰剂的含固量和pH值、聚氨酯涂饰剂膜的感观和机械性能、聚氨酯涂饰剂运用于涂饰中时涂层的性能。
According to excellent smooth,it can be apllied to top finish in leather manufacture and can attain good effect.
介绍了制备新型聚酯增塑剂的生产工艺 ,根据其优良的曲挠性 ,将产品运用于制革中的顶层涂饰 ,可达良好效
The application of all cationic finishing process carried out on pigskin grain leather with PW Cationic Paste in combination with CW Cationic Finishing Agent and feeling agent, in comparison with that using anionic ones, has better coverage effect on damaged grains, more natural lightness and softer as well as fuller hands.
采用ＰＷ阳离子膏配合ＣＷ型阳性涂饰剂及手感剂进行猪正面革全阳离子涂饰工艺，与通常的阴离子涂饰材料相比，对伤残遮盖效果更好，光度自然，手感柔软丰满。
FD-01 Cationic Base Sealing Coat and SC-800 series finishing agents are the polyurethane finishing materials of a new generation.
ＦＤ—０１ 阳离子封底剂及ＳＣ—８００ 系列涂饰剂为新一代聚氨酯涂饰剂产品。
Testing Method about Surface Checking of Painting on the White Oak Multi-Ply Parquet;
柞木多层实木复合地板涂饰表面裂纹的测试方法
Research on Colouring and Painting Technology of Wear and Scratch-resistant Coat on Solid Wood Parquet;
实木系列地板着色与耐磨抗擦伤面漆涂饰工艺研究
The adhering capacity, abrasion value and hardness of paint film were determined; influence of impregnation treatment with PF resin on the painting properties of wood was evaluated afterwards.
本研究采用3种油漆,分别对杨木未处理板材和用质量分数为30%的水溶性酚醛树脂溶液浸渍处理过的杨木板材进行涂饰,通过对两种板材的漆膜附着力、磨耗值和漆膜硬度3个指标的检测和对比,初步分析酚醛树脂浸渍处理对木材油漆涂饰性能的影响,结果表明该处理技术并未对板材的漆膜附着力和磨耗值产生明显的负面效应,反而使板材漆膜硬度较之处理前有所提高,这将为开发酚醛树脂浸渍处理木材产品提供技术支持。
The problems in the processing of eucalypt plantation wood such as end check in harvesting, difficult for sawing, collapse and check in drying, difficult for processing, gluing and coating, are analyzed theoretically.
就桉树人工林木材在加工过程中出现的 :采伐时产生端部开裂、制材加工困难、易产生劈裂、干燥时容易发生皱缩和开裂、机械加工困难、胶合和涂饰困难等 5个生产问题进行了理论分析 ,探讨了出现这些问题的原因 ,提出解决这些问题的具体措施。
Procedures for the coating of outer equipment such as metallic and plastic parts and cleaning of integral equipment were described.
介绍了空调器外观件如钣金件及塑料件的涂饰 ,以及整机装配后的清洗工艺。
Polyacrylate emulsions,which have invariant core-shell structure but vary in cross-linking are synthesized and their coating properties are observed.
合成了既有核 /壳结构又有交联的丙烯酸乳液 ,考查了交联体系对此类乳液涂饰性能的影响。