Study on the maximum tolerable bias(B) in mechanical coal sampler's performance testing for bias;
煤炭采样机偏倚试验中最大允许偏倚(B)的研究
The maximum allowable misalignment of the coupling is0.02 mm.
靠背轮找正的最大允许偏差为0.02毫米。
A error limitation of angle and chordal highness method is used to filtrate clouding point.
对大量数据的精减，利用角度和弦高的最大允许偏差法进行点云精减。
margin of error
最大容许误差;最大允许误差;误差界限;误差量
maximum permissible amount (MPA)
(金额) 最大允许量
The requirements for the intended use include such considerations as range, resolution, maximum permissible errors, etc.
预期使用要求包括：量程、分辨率、最大允许误差等。
Edge processing deviation should be allowed to meet the norms.
边缘加工允许偏差应符合规范的规定.
Quality of electric energy supply-Admissible deviation of supply voltage
GB12325-1990电能质量供电电压允许偏差
maximum authorized mass of vehicle combination
汽车列车最大允许质量
maximum authorized amss of articulated vehicle
铰接车最大允许质量
max allowable continuous working current
最大允许连续工作电流
largest permissible single chamfer dimension
允许最大单一倒角尺寸
maximum allowable tank filling limit
最大允许液舱充装数量
The Maximum permissible error when the working frequency of Resistor is equal to or lower than the measurement frequency.
* 电阻箱的工作频率等于或低于测试频率上限时的最大允许误差。
According to the allowance of production, the maximum error of measurement is used to determine the accuracy of the instrument.
根据生产所允许的最大测量误差来确定仪表的精确度。
Deviation should be allowed to comply with the norms. The shear machine error should be allowed to meet the norms.
气割的允许偏差应符合规范的规定.机械剪切的允许偏差应符合规范的规定.
maximum allowable working pressure
最大容许工作压力;最大允许工作压力;最高允许工作压力
" Hot-rolled beam steel-Dimensions, shape, weight and tolerances"
GB/T706-1988热轧工字钢尺寸、外形、重量及允许偏差
" Hot-rolled channel steel-Dimensions, shape, weight and tolerances"
GB/T707-1988热轧槽钢尺寸、外形、重量及允许偏差