Effects of sintering temperature on fatigue damage of alumina ceramics;
烧结温度对氧化铝陶瓷疲劳损伤过程的影响
Quantitatively research of fatigue damage of alumina ceramics;
氧化铝陶瓷疲劳损伤过程的数字描述
Application of steel-alumina ceramics composite pipe for dilute phase pneumatic conveying;
氧化铝陶瓷内衬复合钢管在稀相气力输送中的应用
Dynamic behaviors of alumina ceramic under high pressure and high strain-rate;
氧化铝陶瓷在高压高率条件下动态特性
Experimental study on shear response of alumina under combined compression and shear loading;
压剪复合冲击下氧化铝陶瓷的剪切响应实验研究
The effect of different impurities and dopants on the dielectric loss of alumina ceramics are reviewed.
综述了不同杂质及掺杂对氧化铝陶瓷介电损耗影响的研究进展。
Effects of nano-silica coating on microtensile bond strength of glass infiltrated alumina ceramic;
纳米硅涂层对玻璃渗透氧化铝陶瓷粘结强度的影响
Mechanical properties of brazing joint of alumina ceramics to mild steel
氧化铝陶瓷与低碳钢钎焊接头的力学性能
Vacuum flashover developing across alumina ceramic at pulsed voltage
真空冲击电压下氧化铝陶瓷沿面闪络现象的发展过程
The research developed the high temperature glaze suitable for Al2O3 ceramics in metallized process under 1450℃.
本文总结并实验对比了国内外的几种高温釉,从而提出釉料化学性质、釉料中氧化铁等变价元素以及原料矿物组成是导致氢烧釉面失光的主要因素,并成功试制出适宜于氧化铝陶瓷以及1450℃金属化工艺的高温釉。
Al2O3 ceramics were successfully superfast densified by spark plasma sintering (SPS) underthe conditions of heating rate as high as 600℃/min, no holding time at the sintering temperaturefrom 1350 to 1700 ℃ and then fast cooling to 600℃ within 3 minutes.
本文介绍用放电等离子超快速烧结方法制备的氧化铝陶瓷的力学性能和显微结构特征。
The alumina black porcelain slurries containing 55% solid volume were obtained by using the preheating technique.
通过对氧化铝黑瓷粉料进行预烧技术处理,增大颗粒尺寸、降低粉体比表面能、改善其团聚现象,制备出固相体积分数达55%的氧化铝黑瓷稳定料浆,并研究了分散剂用量、体系固相体积分数、R值(塑性剂/粘结剂)对料浆流变性的影响。
In this paper,Preheating is used to increase the dimension of alumina black porcelain powder,lower the specific surface energy and improve the rheological behavior of slurry,which is favor to obtain a low viscosity of ceramics suspensions with high solid content.
通过对氧化铝黑瓷粉料进行预烧处理,增大颗粒尺寸,降低比表面能,改善浆料的流变性能,制备出高固相量、低粘度的氧化铝黑瓷稳定浆料。
Effects of Y_2O_3 and Sm_2O_3 on Dielectric Behavior of Alumina Ceramics
掺杂Y_2O_3,Sm_2O_3对氧化铝瓷介电性能的影响
Wettability of Al/Al_2O_3 system and direct aluminum bonded substrates
铝和氧化铝的润湿性及氧化铝陶瓷敷铝基板
line alumina ceramics
透明多晶氧化铝陶瓷
Preparation and Characterization of Veneer Porcelain for Alumina All-Ceramic Crown
氧化铝全瓷冠用烤瓷粉的制备及表征
Preparation and Research of Alumina Matrix Ceramic Composite Reinforced by Mullite and Silicon Carbide Particle;
碳化硅/莫来石/氧化铝复合陶瓷的研制
Polycrystalline Alumina Ceramic Bulb,the Key of the Development of Ceramic Metal Halide Lamp(Ⅰ)
陶瓷金卤灯发展的关键——多晶氧化铝陶瓷泡壳(上)
Alumina powders for use in electron ceramics
GB/T15154-1994电子陶瓷用氧化铝粉体材料
Core Leach Equipment and Craft of Alumina-base Ceramic Core
氧化铝基陶瓷型芯的脱芯设备与工艺
Study on Preparation for Alumina Ceramic by Novel Colloidal Forming;
新型胶态成型制备氧化铝陶瓷的研究
Active Alloy Brazing Al_2O_3 Ceraics and Metal;
氧化铝陶瓷与金属活性封接技术研究
Research on Preparation of Alumina Honeycomb Structure;
微孔氧化铝蜂窝陶瓷结构的制备研究
Manufacture and Properties of the Al_2O_3-based Ceramics;
氧化铝基复合陶瓷的制备和性能测试
Join Al_2O_3/ZrO_2 Ceramics in Green State by Al Oxidation Method;
铝氧化法坯体连接Al_2O_3-ZrO_2陶瓷
Study on the Alumina Ceramic Preparation by Plasma Jet Melting Method
等离子束熔融法制备氧化铝陶瓷研究
Analysis on Microstructure and Phase Structure of Al_2O_3 Ceramic Coating
氧化铝陶瓷涂层的组织与相结构分析
A Study on the Gel-Casting Process of Forming Technology of Al_2O_3 Ceramics
氧化铝陶瓷原位注凝成形技术的研究
Effect of Mullite Fiber on Properties of Alumina Ceramics
莫来石纤维对氧化铝陶瓷性能的影响
Effects of ZnO/Y_2O_3 on Properties of Alumina-Based Ceramics
ZnO/Y_2O_3对氧化铝基陶瓷性能的影响