ANSYS analysis of driving part of the piezoelectric vibration feeder;
压电式振动给料器驱动部分的ANSYS分析
The vibration feeder is a sort of feed equipment which is applied on the automatization line and assembly line.
本文结合“863”计划项目“用于振动给料的超声波驱动理论与方法的研究”开展工作,根据压电驱动技术的基础理论,自制了由双压电晶片振子驱动的横推式压电振动给料器,并进行了试验测试,结果表明该样机具有结构简单、拆装方便、噪音小、给料平稳快速等特点。
Study on influencing factors of feeding speed of electromagnetic vibration feeder;
电磁振动给料器给料速度影响因素的探讨
This paper simply introduces a small electromagnetic vibration feeder transporting granular materials for seeds pilling machine, it s vibrating clearance, obliquity of trough, and stepless speed regulation affect the productivity of the electromagnetic vibration feeder, offer basis and reference for further research.
简要介绍了小型电磁振动给料器在用于种子丸化机输送粉剂时,其激振间隙、槽体倾角及无级调速对电磁振动给料器生产率的影响,为进一步研究提供依据和参考。
The force status of the primer vibration system of electromagnetic vibration feeder is analyzed, and the operation frequency and natural frequency of the system are deduced from vibration force modeling and the calculation of electromagnet attraction and sprint stiffness.
对三种工作状态进行了比较分析,提出了工作点的选择和调整方法,对电磁振动给料器稳定工作具有重要意义。
In this paper,a intelligent driving electrical source of small piezoelectric resonance-conveying machine is given,which can produce sine waves of multiform frequencies and amplitudes,as a result it is not necessary to bring forward exigencies with free frequency of resonance conveying machine.
提出并研究了一种小型压电式振动给料器的智能化驱动电源 ,可以在一定范围内输出多种频率及振幅的正弦波 ,从而可以不必对振动给料器的固有频率提出苛求。
In view of the problem that the complementary vibration of vibrating feeder results in the excessive consumption of raw material in manufacture of FCMP, various brake modes of the brakemotor are studied, and an improved halfwave dynamic braking is adopted.
针对高炉法钙镁磷肥生产中 ,因振动给料机余振导致多给料引起原燃料消耗增加的问题 ,分析研究了振动电机的各种制动方式 ,采用改进的半波能耗制动对原电气控制回路进行了改造 ,有效地消除振动给料机的余振 ,确保了准确配料 ,使每吨钙镁磷肥焦耗降低 6 kg,对年产 2 0万 t钙镁磷肥厂 ,全年节焦 12 0 0 t,年降低成本 72万
The moving process of solid particles in a vibrating feeder is investigated by means of Discrete Element Method.
利用离散元方法对颗粒在振动给料机中的运动过程进行了数值研究。
This paper describes a method of fuzzy optimum design of inertial vibrating feeders,on the basis of analyzing vibrating characteristics of inertial vibrating feeders.
采用模糊优化设计出的振动给料机的效果最好 ,在满足工作要求的情况下 ,其传出的振动最小 ,从而使噪声大大降低。
ANSYS analysis of driving part of the piezoelectric vibration feeder;
压电式振动给料器驱动部分的ANSYS分析
Design and Experimental Research of Piezoelectric Vibration Feeder of Vertical Driving;
垂直驱动式压电振动给料器的设计及实验研究
The Disquisition of Screen Vibration Feeder Failure Analysis and Improve Measures;
筛分机振动给料器失效分析及改进措施研究
The Design and the Experimental Research of Horizontally Pushes Type Piezoelectricity Vibration Feeder;
横推式压电振动给料器的设计与试验研究
Mechanism Analysis and Experimental Research of the Piezoelectric Vibration Feeder;
压电式振动给料器的机理分析与实验研究
Mechanism Analysis and Experimental Research of the Vertical-drive Type Piezo Inline Feeder;
垂直驱动式压电直线振动给料器的机理分析及实验研究
Experimental Study on Ultrasonic Vibration Feeding System Using the Longitudinal Mode Transducer;
采用纵振换能器的超声振动给料系统的实验研究
closed magnetic-vibrating feeder
封闭型电磁振动给料机
Design Vibration Feeder Parameters of Y800X5000
Y800X5000振动给料机参数设计
Dynamic Characteristic Analysis of Vibration Feeder Based on ANSYS
基于ANSYS的振动给料机给料槽动态特性分析
The feeding control system is designed in the mode of electromagnetic vibration.
电磁振动给料控制系统采用了电磁振动的方式。
Safety code for vibration feeder
GB16490-1996振动给料机安全规范
Characteric Analysis and Simulation Control of Electormagnetic Vibration Feeder;
电磁振动给料机特性分析与仿真控制
An optimization of vibrating feeding system of bridge-type grab ship unloader
桥式抓斗卸船机振动给料系统的优化
Structural analysis of the CDQ electromagnetic vibrating feeder
干熄焦用电磁振动给料机的结构分析
Mondal analysis of two-mass vibration feeder based on ANSYS
基于ANSYS的双质体振动给料机模态分析
Simulation in Electromagnetic Vibration Feed System with MATLAB Software
基于MATLAB软件的电磁振动给料系统仿真
The weigh belt will turn on bin shaker to start the material moving again.
带秤将开动料箱的振动器，以使物料继续流动。