Design of movement control system of laser micro-processing;
激光微加工中运动控制系统的设计
The effect of laser micro-processing on the electroless plating of copper on ceramic substrate was investigated.
采用扫描电镜(SEM)、X射线光电子谱(XPS)、X射线衍射能谱仪(XRD)等手段比较激光微加工处理前后陶瓷表面形貌发生的变化,探讨了激光微处理在陶瓷表面无敏化活化化学镀铜工艺中的作用。
The simulation results demonstrate that the superresolution performances of such kind of phase plates are even better by taking two-photon absorption into consideration in the femtosecond laser micro fabrication system.
对超衍射理论进行了研究和分析,通过利用优化算法设计了对应于横向、纵向,特别是三维超衍射的3种二元相位元件;模拟结果表明在飞秒激光微加工系统中,考虑双光子效应,这种相位元件的超衍射性能尤为理想。
4 mm beam width are fabricated by using laser micromachining technique.
通过控制工艺参数,在Al2O3陶瓷基底上制作出性能良好的Pt加热电阻及电极,并采用激光微加工技术实际制作了梁宽为0。
Laser microprocessing is a new branch of laser processing technology.
激光微加工技术作为激光加工技术的一个新兴分支，已被越来越广泛地应用于精密机械加工、微机械制造等诸多领域。
During the last ten years of 20~(th) century, due to the research and application of Micro Electric Mechanical System, a new branch of laser fabrication which named laser micro-fabrication is rising.
随着科学的发展,激光微加工以其独有的特点,已经在当今微加工领域起到了不可替代的作用。
Pouble-cladded Fiber Bragg Gratings Made with a Femtosecond Microfabrication Method and its Application in Fiber Lasers
飞秒激光微加工制作双包层光纤光栅及其在光纤激光中的应用
Study of laser fabricated system and its control system
激光微加工系统及其控制单元的研究
Fabrication of Photonic Crystal Microcircuits by Excimer Laser Micromachining System
利用准分子激光微加工系统制备光子晶体线路
The Software and Hardware Design in Laser Micro-Fabrication Control System;
激光微加工控制系统软件及硬件的设计
Laser Micromachining of Medical Titanium Surface and the Bioactivity Study;
医用钛表面激光微加工及其生物活性研究
Research on Auto Focus System Suitable for Laser Micro Machining
适用于激光微加工的自动对焦系统的研究
Polymer Micro-Photonic Device Micro-Fabrication by Femtosecond Laser;
聚合物微光子器件的激光细微加工研究
Study on the Process and Mechanism of Excimer Laser Micro-Machining;
准分子激光微细加工工艺和加工机理研究
Study on Laser Assisted Microprocessing for Fabrication of Monolithic OEICs;
单片OEICs的激光微细加工技术研究
Studies on Theories and Experiment in Femtosecond Laser Micromachining;
飞秒激光微精细加工理论与实验研究
Investigation on Numerical Simulation Technology of the Laser Processing for the Micro-Hole;
激光微孔加工过程数值模拟技术研究
Mark micromachining laser scanning system controlled by microcomputer
掩膜微加工激光扫描单片机控制系统
Microlens Fabrication with Excimer Laser and Diaphragm;
准分子激光光阑法加工微透镜的工艺研究
Research on Some Key Problems in Femtosecond Laser Fabricating Micro-optics Devices;
飞秒激光加工微光学器件若干关键问题研究
The Research of Femtosecond Laser Fabrication Which is Based on DPO-PPV Photoisomerization
基于DPO-PPV光致异构化的飞秒激光微纳加工研究
A novel fiber optic biosensor based on microchannels fabricated Laser
一种基于激光加工微型通道的光纤生物传感器
Research on Machining of High-aspect-ratio Microstructures Based on Excimer Laser;
基于准分子激光大深宽比微结构加工工艺研究
Technology for Laser Fabricating Sample-Chamber of Microfluidic Chip;
激光加工微流控生物芯片储液池的工艺研究