It can not interpret the fact why liquation cracks appear around the fusion line and are very short, but it may be satisfactorily explained by the high temperature strain distribution characteristic figure brought up by author.
传统观点尚不能解释液化裂纹出现于熔合线处和裂纹很短的现象,用作者给出的高温应变分布图可很好解释。
A large number of liquation cracks ar.
转子紫铜环熔焊焊接接头的失效原因分析认为:紫铜环熔焊焊缝内部存在大量的液化裂纹,其产生原因是焊缝内混入过量的氧元素,高温时形成低熔共晶体(Cu2O+Cu),低熔共晶体分布在晶界上,削弱了铜在高温时的晶间结合力,焊接接头力学试验结果表明存在焊接缺陷的HS201焊接接头抗拉强度显著下降。
It is observed that considerable liquation microcracks and some other microffissures called solid-state microcrack initiate in the regions nearby the fusion line and propagate across the grain boundary.
研究发现，熔合线附近的热影响区产生大量液化裂纹和沿晶扩展的固相裂纹。
Discussion on the Cracking Cause of LPG Tank in Service
在用液化石油气贮罐裂纹成因的探讨
ANALYSIS AND REPAIR OF CRACKS IN A 1500m~3 LPG SPHERICAL TANK
1500m~3液化气球罐裂纹缺陷分析及修复
Meso-mechanical experimental study of meso-fraeturing process of limestone under coupled chemical corrosion and water pressure
化学溶液及其水压作用下单裂纹灰岩破裂的细观试验
total elongation and fish-tail change with liquid core rate of steel ingot; join mark and splits etc. produced surface of the rolled metal.
轧件的总延伸和鱼尾量随轧件的液芯率而变化,在轧件表面产生交接痕及裂纹等。
Analysis on Hot Crack for Forging Die Made by Squeeze Casting
锻模液态模锻成形过程中热裂纹形成原因分析
Study of Corrosion Fatigue Crack Growth Characteristic for 07MnNiCrMoVDR Steel in H_2S Solution;
07MnNiCrMoVDR钢在H_2S水溶液中腐蚀疲劳裂纹扩展特性研究
Finite Element Analysis of the Crack Tip Field and Structural Evolution Behavior of the Crack Tip;
裂纹尖端场的有限元分析与裂尖结构演化行为
Crack Analysis and Disposal for the Weld of High-Pressure Stainless Steel Pipe in Hydrocracking
加氢裂化高压不锈钢管道焊缝裂纹分析及处理
Furthermo re, the zinc vaporating and oxydizing cause air bubble, incomplete fusion and cr ack.
锌挥发和氧化会导致气孔、熔合及裂纹。
The cracks appeared at the interface between carbide and matrix.
③在碳化物与基体的交界面上产生裂纹。
Study on Self-Blunting of Crack and Its Mechanism in Smart Concrete;
机敏混凝土裂纹自钝化及其机理研究
Theoretical and Applied Research on Crack Growth and Damage Evolution
裂纹扩展与损伤演化理论与应用研究
Corrosion Resistance of Bellow Materials for Catalytic Cracking Unit
催化裂化装置用波纹管材料的耐蚀性能研究
The Evolution of Matrix Crack in Three Dimensional Carbon/Silicon Carbide Composites;
三维碳/碳化硅复合材料基体裂纹演化规律
The Stress Corrosion Cracking of the Regenerator in Fluid Catalytic Cracking--the Controlling of Stress Factors in Equipment Manufacturing;
催化裂化再生器应力腐蚀裂纹“应力因素”在设备制造中的控制
seal-split cowhide bag
海豹纹理状裂纹牛皮袋
Study on the digitized HPLC fingerprints of Ciwujia injection
刺五加注射液HPLC数字化指纹图谱研究