Testing Study for Buckling of Composite Cylindrical Shell with Delaminations;
脱层复合材料圆柱壳屈曲的实验研究
Buckling and initial post-buckling of delamination bridged by nonlinear fibers in 3D composites;
3D复合材料中非线性纤维搭桥下脱层的屈曲和初始后屈曲
Effects of fiber bridge on delamination buckling in 3D composites;
3D复合材料纤维搭桥对椭圆脱层屈曲的影响
The bimetal cementation,the compound material and the metal cementation,the compound material and the compound material cementation three types of lamination boards delaminates on its natural frequency had been separately studied and delaminating with the natural frequency relations diagram of curves had been drawn up.
用有限元软件MARC建立了具有脱层和无脱层的两端固支层合板模型,并进行了模态分析。
Decarburized layer appears in the two sides of the crack.
裂纹两侧出现了一定宽度的脱碳层,脱碳层内部出现了二次氧化产物。
In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.
为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。
A new method for characterization of softening in a decarburized layer is proposed.
提出一种表征脱碳层软化的新方法，该方法借助Ｘ射线应力分析技术测量屈服强度在脱碳层深度方向上的分布。
A resin lamina of glue "502" with ethyl a-cyanoacrylate was first coated on the flat slide of glass substrates as release layer.
先在玻璃基片上涂覆一层α-氰基丙烯酸乙酯为主体的"502胶"作为脱模层,再以溶胶-凝胶涂膜法在其表面涂覆TiO_2薄膜,经丙酮浸泡溶解脱模层后得到片状粉末。
Research on Nonlinear Static-Dynamic Characteristics and Delamination Growth for Composite Laminated Circular Plates with Delamination
具脱层层合圆板的非线性静动力性能及脱层扩展研究
ANALYSIS OF POSTBUCKLING AND DELAMINATION GROWTH FOR DELAMINATED PIEZOELECTRIC LAMINATED BEAMS UNDER HYGROTHERMAL CONDITIONS
湿热条件下具脱层压电层合梁的后屈曲及脱层扩展分析
Delamination Growth for Composite Laminated Beams Subjected to Transverse Linear Load
复合材料层合梁在横向线载荷下的脱层扩展
INVESTIGATION ON THE BUCKLING OF DELAMINATION BETWEEN ELECTRODE AND PIEZOELECTRIC LAYER WITH FINITE THICKNESS
有限厚压电层表面金属电极脱层的屈曲研究
STUDY OF DYNAMICAL PROPERTIES OF LAMINATED BEAMS WITH DELAMINATING DAMAGE
脱层损伤对层合梁动态特性影响规律的研究
Harmonic response analysis for a laminated piezoelectric beam with an arbitrary delamination
具任意脱层压电弹性层合梁的谐响应分析
BUCKLING ANALYSIS OF THE ELECTRODE DELAMINATION ON THE PIEZOELECTRIC SUBSTRATE
压电体表面金属电极脱层的屈曲分析
ELASTICITY SOLUTION OF SIMPLE-SUPPORTED COMPOSITE BEAMS WITH DELAMINATIONS
含脱层复合材料简支梁的弹性力学解
Research on Nonlinear Static-Dynamic Characteristics and Delamination Growth for Composite Laminated Cylindrical Shells with Delamination;
具脱层复合材料层合圆柱壳的非线性静动力学性能与脱层扩展研究
(of a covering)come off in strips or flakes
（指覆盖层）剥落,脱落
specified percentage decarburation
规定脱碳率的脱碳层厚度
DEOXYGENATION CHARACTERISTIC OF SULFIDE OXIDATION IN THE PROCESS OF OXYGEN-BEARING COAL MINE METHANE
含氧煤层气脱氧过程中硫化物的脱氧特性
Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
直径公差，偏圆度及脱碳层的平均深度
Determination of depth of decarborization of steel
GB/T224-1987钢的脱碳层深度测定法
Preparation of Wood/Montmorillonite(MMT) Intercalation Nanocomposite;
木材/蒙脱土纳米插层复合材料的制备
Study on the Intercalation and Interaction of Gelatin-montmorillonite;
明胶—蒙脱土的插层及其相互作用研究
Being Freed and Detached--On the Deep Meanings of Sing of Chi Bi Three Times;
解脱与超越——论赤壁三咏的深层意蕴