Using solvent refining technique to produce rubber oil from furfural extract oil and catalytic cracking cycle stock was studied.
采用溶剂精制工艺处理糠醛抽出油、催化裂化回炼油,用以生产橡胶用油。
Taking solvent refining technique to produce rubber oil from furfural exaract oil and catalytic cracking heavy oil.
采用溶剂精制工艺处理糠醛抽出油、催化裂化重油 (回炼油和油浆 ) ,用以生产橡胶用油。
The oil-extended processing properties and the mechanical properties of the oil-extended rubber of high Mooney viscosity trans-1,4-polyisoprene with supported titanium catalyst system were studied.
采用干法充油工艺,对用负载钛体系催化异戊二烯本体沉淀聚合得到的高门尼粘度反式 1,4 聚异戊二烯(TPI)的充油工艺性能及充油橡胶的性能进行了研究。
The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex.
结果发现,调节叔十二碳硫醇用量可制备出具有不同相对分子质量的SBR1778胶乳;胶乳的门尼粘度越高,填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。
Preparation of biodiesel fuel with rubber seed oil;
橡胶籽油制备生物柴油的研究
Preparation and refining of rubber seed oil;
橡胶籽油的制取及精炼工艺研究
Separation of unsaturated fatty acids from rubber seed oil——Separation and purification of polyunsaturated fatty methyl ester;
橡胶籽油中多价不饱和脂肪酸分离技术研究——尿素包合法分离多价不饱和脂肪酸甲酯
The drawback of three_open rubber oil seal mould was pointed out.
指出了三开橡胶油封模存在的弊端 ,介绍了二开油封模的新结构及制造工艺 ,新模具从根本上解决了三开油封模存在的问题 ,极大地提高了油封的性能、外观质量及生产效率。
The selection of lip structure of mold for rubber oil seal is briefly descriped in respect to the geometrical precision and the dimensional tolerance of rubber oil seal, the performance of mold,and the quality of product.
围绕橡胶油封唇口的几何形状精度、尺寸公差及模具的操作性能、产品质量，简要介绍了橡胶油封压胶模唇口结构的选择。
The plastic colloid is easy to produce irregular distortion by the force emerged during the assembly process of the rubber oil seal.
橡胶油封在装配过程中,塑性胶体容易产生不规则变形,由于变形曲线无法准确描述,从而影响了进一步的受力分析。
The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex.
胶乳的门尼粘度越高,填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。
TRIAL PRODUCTION OF OIL-FILLED SBR1723
充油丁苯橡胶SBR1723的试生产
Properties of oil-extended solution polymerized styrene-butadiene rubber filled with different silica
不同白炭黑填充充油溶聚丁苯橡胶的性能
Preparation of Rubber Filling Oil from Mek Dewaxed Oil;
以“老三套”脱蜡油为原料研制橡胶填充油
STUDY ON MOONEY VISCOSITY-CONTENT OF EXTENDER OIL-PROPERTY INERRELATION IN OLL-EXTENDED BR WITH NICKEL CATALYST SYSTEM
镍系充油顺丁橡胶的门尼粘度—充油量—性能的相关性研究
Effect of oil extension on properties of trans-1,4-polyisoprene and its blends with styrene-budadiene rubber
充油对反式-1,4-聚异戊二烯及其与丁苯橡胶并用胶性能的影响
Foam rubber is soft rubber full of small air-bubbles.
泡沫橡胶是充满了小气泡的软橡胶。
filled polyisoprene rubber
填充聚异戊二烯橡胶
calking compound, synthetic rubber base, wooden deck seam application
木甲板合成橡胶填充料
inflatable product of rubber coated fabrics
充气橡胶涂覆织物制品
Oil and grease will rot the rubber of your tyre .
油污能腐蚀轮胎橡胶。
Oil-resisting asbestos-rubber sheets
GB/T539-1995耐油石棉橡胶板
Oil and grease will rot the rubber of the tyre.
油污会腐蚀轮胎的橡胶。
liquefied petroleum gas hoses
液化石油气用橡胶软管
Oil and grease will rot the rubber of your tyres.
油污能腐蚀轮胎橡胶.
STUDY ON THE ELASTOMER COMPATIBILITY OF RUBBER SEED OIL BIODIESEL
橡胶籽生物柴油与橡胶材料的相容性研究
Effect of modified starch on properties of styrene-butadiene rubber/cis-1,4-polybutadiene rubber blend filled with carbon black
改性淀粉对炭黑填充丁苯橡胶/顺丁橡胶并用胶性能的影响
FLUE GAS TREATMENT ON THE COMBUSTION OF SCRAP COATED BY PAINT,OIL DIRTY OR RUBBER
含油漆、油污、橡胶废钢焚烧烟气治理