In this paper a multiple necking upsetting technological method was advanced according to the special shape and the dimensions of the high pressure gas bottle through the technological analysis and the experiments many and many a time,and the key technical problems of the practical production were solved.
根据高压气瓶的特殊形状及尺寸 ,通过塑性工艺分析及许多次工艺试验 ,文中提出了一种多次缩口顶镦工艺方法 ,从而解决了实际生产的关键技术问题。
In this paper,the technical inspection items and the evaluation criteria of 40MPa high pressure vessel are concluded,and the technique and loading process of acoustic emission detection are especially introduced.
对40MPa高压气瓶的技术检验项目和评定标准进行了小结,重点介绍了声发射检测的方法和加载程序。
This paper studies the design,process and test of aramid filament wound thin wall high pressure vessel with aluminum liner.
本文对薄壁铝内衬芳纶纤维缠绕复合材料高压气瓶的设计、工艺制作、试验进行了研究 ,针对芳纶复合材料低层间剪切强度、易吸潮及高温条件下强度损失大的特点 ,研究一种高层间剪切强度、耐高温的树脂体系 ,并对该树脂体系的工艺进行研究 ,并进行了大量的试验验证 ,从而得出芳纶纤维缠绕金属内衬复合材料高压气瓶的设计方法和工艺制作方法。
Propellant tank and high pressure vessel are important component of satellite prolusion system.
推进剂贮箱、高压气瓶(简称贮箱、气瓶)是卫星推进分系统的重要核心部件。
The regulators are mainly used in Oxygen, Acetylene, Hydrogen etc. gases decompression. It has the double一 function of reducing steading the gas pressure.
主要用于氧气、炔、气等高压气瓶的减压装置，有降压和稳压两种作用。
Design and Simulation of 40MPa High Pressure Gas Bottle Made of TC4;
40MPa钛合金高压气瓶的设计及仿真
low pressure cylinder regulator
低压石油气瓶调压器
accumulator air-charging manifold
蓄压器充气阀箱压缩空气瓶充气阀箱
Method for pneumatic test of dissolved acetylene cylinders
GB/T13003-1991溶解乙炔气瓶气压试验方法
The carrier gas is supplied to the instrument at constant pressure from a cylinder.
载气一般由压缩钢瓶供给，并要使载气压力恒定。
Steel cylinders for the on--board of compressed natural gas as a fuel for vehicles
GB17258-1998汽车用压缩天然气钢瓶
Method for hydraulic burst test of gas cylinders
GB15385-1994气瓶水压爆破试验方法
Method for hydraulic test of gas cylinders
GB/T9251-1997气瓶水压试验方法
Method for flattening test of seamless gas cylinders
GB/T13440-1992无缝气瓶压扁试验方法
Test Method for the Production of Hydraulic Cylinders Application Analysis
气瓶水压试验方法的比较及应用分析
ANALYSIS ON EXPLOSION CASE OF A HIGH-PRESSURE GAS BOTTLE MADE OF 37Mn STEEL FOR EXTINGUISHER
37Mn高压消防气瓶爆炸原因分析及对策
The cylinder pressure will remain constant at the vapor pressure of the material as long as there is any liquid remaining in the cylinder.
只要在钢瓶内还有液体，钢瓶的压力就会保持在材料的蒸气压。
In the high-pressure system both oxygen and acetylene are used from high-pressure cylinders.
在高压法中，氧气和乙炔都取用于高压瓶。
respiratory mask for use with oxygen or compressed air bottles
呼吸面具,与氧气或压缩空气瓶一道使用
The amount of gas in a cylinder is determined by the pressure, temperature, cylinder size, and cylinder pressure rating. The molecular symbol for hydrogen is H2 .
钢瓶的气体容量由压力、温度、钢瓶尺寸和钢瓶的额定压力来决定。氢的分子式是H2.。
Compressed gas suppliers are required to inspect cylinders for visual damage each time the cylinders are filled.
每次钢瓶灌装时，要求压缩气体供应商检查钢瓶是否有可见的损伤。
Refill compressed gas cylinders. This is to be done only by qualified producers of compressed gases.
重新灌装压缩气体钢瓶。这只能由有资格的压缩气体制造商来做。