The pre-stress due to rotation and fluid-structure coupling effect are considered.
考虑了旋转预应力作用和流固耦合效应,对风机叶片系统进行动力学分析。
Effect of stress path circumgyration on shear modulus under small strain and initial stress state;
小应变原岩状态下应力路径旋转对剪切模量的影响
Effect of stress path circumgyration on shear modulus under small strain
小应变条件下应力路径旋转对剪切模量影响
Discussion on laboratory test simulation of principal stress axes rotation induced by traffic loading;
交通荷载引起的主应力轴旋转室内试验模拟探讨
The influences of principal stress axes rotation.
主应力轴旋转对岩土工程的影响日益受到人们的重视。
In many practical geotechnical problems,soils are always subjected to the stress path involving the principal stress rotation.
试验表明:土体强度主要受原生各向异性影响,试样在破坏时的主应力作用方向以及中主应力参数是影响土体强度的主要因素,而主应力轴旋转对于强度则无显著影响;试样无论是否经历主应力轴旋转,在破坏时都会有显著的剪切带产生,同时剪切带平面与大主应力作用方向的夹角基本保持一个常数;主应力轴旋转会引起土中孔压积累,积累程度受主应力轴转幅及旋转时剪应力幅值、剪应力水平支配。
The experiments used to detect the characteristics of soil under the condition of principal stress rotation are analyzed systematically.
对目前国内外主应力轴旋转条件(包括单向旋转和循环旋转)下土体性状研究的室内试验进行系统的分析与总结,得到以下结论:土体在不排水主应力轴旋转条件下产生孔压积累,这在主应力轴循环旋转中特别显著,且通常大于等剪应力幅度的动三轴或扭剪试验产生的孔压,并可建立与某种应变增量的函数关系,此外孔压开展的速率与程度受到土体原生各向异性的影响,但当试样所受剪应力水平较低时,上述影响的程度减弱。
Mode Analysis of Fluid-Structure Coupling Blade under Rotational and Pre-stress Condition
旋转预应力条件下的叶片流固耦合模态分析
Predictability of spatial ability using image mental rotation test;
表象旋转测验预测空间能力的有效性
The Appliance of the Rotating and Regressive Amalysis in the Prevention of the Plant Diseases & Insect Pests;
旋转回归分析在预防病虫害中的应用
Application of DFAR Model to the Trend Prediction of Fault in Rotary Machines
DFAR模型在旋转机械故障预测中的应用
Analysis of Dynamic Characteristics and Response for Rotating Blades of Wind Turbine;
风力机旋转叶片动力特性及响应分析
The Rotary Disc’s Stress Distributing Identical With the Finite Element Numerical Simulation’s Result;
旋转叶轮应力分布的有限元数值模拟
Experimental Study on dynamic characteristics of saturated clay under cyclic rotation of principal stress directions
主应力轴旋转下饱和黏土动力特性的试验研究
A Study on the Rotation Effects to the Characteristics of Blade Lift of the Wind Turbine
旋转效应对风力机叶片升力性能影响的研究
Influence analysis of stress stiffening effect of rotating wheel-disc on its modal characteristics
旋转轮盘应力刚化效应对模态特性影响分析
Effect of stress path circumgyration on shear modulus under small strain
小应变条件下应力路径旋转对剪切模量影响
Research of Oil-Water Pre-Separation Hydrocyclone and Its Industrial Application;
油水预分离水力旋流器及其工业应用技术研究
Drawing fracture cause analysis of wire rod for spiral ribbed pre-stressed steel wire
螺旋肋预应力钢丝用盘条拉拔断裂原因分析
Experimental Study on the Transmission Length of Prestressed Reinforcement with Helical Rib(PC Steel Bars) in Concrete
螺旋肋钢丝(PC棒)预应力传递长度的试验研究
The boundary element method (BEM) for stress analysis of interference-FIT atrotating condition
旋转状态下干涉配合应力分析的边界元法
Stress and Vibration Analysis of Rotating Parts of Sleeve Filter Centrifuge;
翻袋式离心机旋转部件的应力和振动分析
Dynamic Response Analysis and Simulation of Shell of Revolution;
旋转壳体碰撞动力响应分析与仿真模拟
Dynamic Response Analysis of Rotor-bearing System Under Random Earthquake Excitations;
随机地震激励下旋转轴系的动力响应分析
Analyses of Stress and Displacement of Lumbar Vertebrae during Simulating Sitting-Rotatory Manipulation by Finite Element;
坐位旋转手法时腰椎应力及位移的有限元分析