The maximum shear stress is used to act as the criterion of the bonded strength.
建立了涂层构件边界元法,并引入解析化算法处理其中的几乎奇异积分,以分析赫兹压力作用下涂层构件的力学行为;提出以最大切应力作为涂层结构强度的评判标准;分别讨论了涂层尺寸和涂层/基体材料的变化对最大切应力的影响,找出了受赫兹压力作用涂层构件的强度危险面。
The maximum shear stress and the maximum tensile stress on the coating and substrate interface were analyzed.
通过对涂层与基体界面最大剪切应力和最大法向应力的分析,比较了模型中不同基体台阶深度、涂层尺寸对界面结合强度的影响。
maximum shear stress yield criterion
最大剪切应力屈服条件
Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9.
粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
Draw the element for maximum shear stress and mark values of all stresses.
画出最大剪应力的单元体并标出全部应力值。
critical shear strain energy theory
最大剪应变能量理论
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9.
摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
Application of Lead Shear Damper on Shear Wall Residential Building's Shock Absorption
铅剪切阻尼器在剪力墙住宅结构中的应用
SHEAR STRESS VARIATION WITH TIME AND STRONGAFTERSHOCK PREDICTION OF THE 1988 LANCANG-GENGMA EARTHQUAKE SEQUENCE
1988年澜沧—耿马大震序列剪切应力值随时间的变化与强余震预报
Study on the effects of flow shear stress in constructing large-scale tissue-engineered bone using a perfusion bioreactor
灌注式生物反应器中流体剪切力对大段组织工程化骨构建的作用
critical shearing strain of foam
泡沫的临界剪切应力泡沫中
The shear stress in interver tebral disc mainly distributed in fibrous rings.
②椎间盘的剪切应力主要分布在纤维环。
Accordingly, it is important for us to improve the utilizationof the stress shearing technique.
因此，应力法剪切技术的推广相当重要。
Expression for Pure Shear by the Euler Angles
纯剪切应力状态的Euler角表示
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
In developing equations for maximum shear stresses, the special case will be considered.
在导出最大剪应力表达式时，将考虑一种特殊情况。
Effect of High Shearing Stress During Melt Extruding on the Mechanical Properties of PS/SEBS/CaCO_3 Blends
高剪切应力对PS/SEBS/CaCO_3材料力学性能影响
Cyclic Stress History Effects on Small-strain Shear Modulus of Silt;
循环应力历史对粉土小应变剪切模量的影响