Properties of a new thermoplastic elastomer sulfonated styrene-butadiene rubber ionomers and their blends;
热塑性橡胶——磺化丁苯橡胶离聚体的性能及其共混
Synthesis and properties of water-absorbing thermoplastic elastomers --oxyethylene-oxypropylene-styrene multiblock copolymers;
吸水性热塑性橡胶——氧乙烯-氧丙烯-苯乙烯多嵌段共聚物的合成及性能
FLAKING METHOD OF MEASURING THE PHYSICAL PERFORMANCE OF SBS SAMPLE;
测定热塑性丁苯橡胶颗粒样品物理性能的制片方法
The thermoplastic elastomer from SBS/LDPE blend having excellent mechanical properties,such as high mechanical strength and elongation at break and repeatable processability,was prepared by partial dynamic vulcanization.
选用热塑性丁苯橡胶(SBS)和低密度聚乙烯(LDPE)为主体材料,采用部分动态硫化法制备了一类性能良好的材料热塑性丁苯橡胶 低密度聚乙烯共混型热塑性弹性体,具有力学强度高,断裂伸长率大,可重复加工等特点,并研究了聚烯烃的品种、橡塑比、硫化体系等因素对动态硫化SBS LDPE热塑性弹性体力学性能的影响。
Effect of plasticizers on acrylonitrile-butadiene rubber/polypropylene thermoplastic vulcanizate;
增塑剂对丁腈橡胶/聚丙烯热塑性硫化橡胶性能的影响
Preparation and properties of thermoplastic vulcanizates;
热塑性硫化橡胶的制备与性能
Gaskets and O rings are made of elastomers.
密封垫和O型环是由人造橡胶制成的。
testing methods for pilling resistance of textile fabrics：elastomeric pad method
纺织品抗起球起毛性试验法：人造橡胶板法
If elastomers must be used, Teflon and materials are acceptable for NF3 service.
如果必需使用人造橡胶，对于NF3，特氟纶和Kel-F是可以接受的材料。
Teflon or PCTFE offer good resistance when elastomers are required.
当要求使用人造橡胶时，特氟纶或PCTFE提供了良好的抵抗力。
The spectrum indicates that a polyethylene-like species has migrated to the surface of the elastomer.
该光谱表明，聚乙稀类物已经迁移到人造橡胶的表面。
The diaphragms may become permanently inverted and the elastomeric stem tip can cold flow down the throat of the valve.
横膈膜会永久性的翻转，人造橡胶阀杆尖端会冷变形到阀门的喉管处。
The replacement of elastomeric seals with metal diaphragms gives this valve superior leak integrity to the atmosphere.
用金属横膈膜代替人造橡胶密封给予了这种阀门更好的对空气的泄漏完整性。
This plug of extruded elastomer can be lodged in the throat so tightly that even 2000 psig of pressure will not dislodge it.
突出的人造橡胶会紧紧的堵在喉管处，即使2000 psig的压力也不能把它移走。
synthetic diamonds, rubber, etc
人造钻石、 合成橡胶.
synthesize diamonds, rubber, fuel, etc
用合成法制造钻石、 橡胶、 燃料等.
occurs in natural gas; used in the manufacture of rubber and fuels.
见于天燃气中，用于制造橡胶和燃料。
Indian Rubber Manufacturers Research Associate (IRMRA)
印度橡胶制造商研究协会
International Institute of Synthetic Rubber Producers, Inc(IISRP)
国际合成橡胶制造商学会
" Rubber compounding ingredient--Carbon black, pelletized--Specification"
GB/T14853.7-1994橡胶用造粒炭黑技术条件
φ450×1200 Rubber Rolling Mill Techniques Reforms;
φ450×1200橡胶压延机技术改造
Production and Application of Si-rubber Mold;
硅橡胶模制造及其应用的研究与实践
Technical innovation of recycled-water system;
橡胶轮胎生产循环水系统的技术改造
Modification of styrene degassing tower in styrene butadiene rubber production
丁苯橡胶生产中苯乙烯脱气塔的改造