3%Cu alloy solidified under a stationary magnetic field was measured through a way of double electric bridges,the liquidus and solidus temperature of the alloy under the stationary magnetic field were determined by the analysis of the curve when the intensity of the magnetic field was 0.
12T的直流磁场下凝固时的液相线温度和固相线温度,发现直流磁场对Al-13。
645 ℃ and the liquidus in the range of 216.
6 4 5℃ ,较块体Sn -Ag -Cu合金的熔点 2 2 1℃降低了 2 8℃ ;液相线温度为 2 1 6 。
The liquidus temperature, solidus temperature and crystal interval of Al-11.
4%Cu合金在交流磁场中凝固的电阻,确定了合金液相线和固相线温度以及结晶区间。
The roles and characteristics of interaction energies in the equations of liquidus lines were analysed.
用规则溶液模型预测相图中的液相线,分析了液相线方程中分子间相互作用能ue的作用和物理意义。
The as-cast microstructure of ZL201 alloy prepared by near-liquidus electromagnetic casting(NLEMC)was studied by means of electron microscope and image analyzer,and the mechanical properties of the alloy parts thixoformed were given through tests.
采用电子显微镜、图像分析仪、维氏硬度计及电子拉伸机,研究了ZL201合金近液相线电磁铸造(NLEMC)的铸态显微组织,进行了触变成形实验,测试了成形件的力学性能。
Preparation of a New High Strength and Heat Resistant GW103K Magnesium Alloy Semi-solid Slurry by Near Liquidus Method
高强耐热镁合金GW103K近液相线制浆工艺
Analysis on Microstructure of AlSi7Cu5 Alloy Obtained by Slope-liquidus Method
AlSi7Cu5合金斜板近液相线铸造组织分析
Study on Simulation of Structures of Semi-solid Metal Slurry Made by Liquidus Casting Using Phase-field Method;
半固态合金液相线铸造组织相场模拟研究
Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC
液相线半连续铸造7075铝合金半固态组织演变
As-cast Microstructures of 356 Aluminum Alloy Cast by LSC
356铝合金液相线半连续铸造组织的研究
On influence of interstitial elements on Ti-Al liquidus;
氧、氮等间隙元素对钛铝合金液相线影响的研究
Effect of Pouring Disturbance on Preparation of Semi-Solid AlSi9Mg Alloy by Near Liquidus Casting
浇注扰动对近液相线铸造半固态AlSi9Mg合金的影响
Study on the microstructure of Al-Mg-Si-Cu alloy semi-continuously cast near liquidus
Al-Mg-Si-Cu合金近液相线半连续铸造组织研究
Experimental study of effect of phosphorous on liquidus temperature of peraluminous magmatic system
磷对过铝质岩浆液相线温度影响的实验研究
Casting and remelted microstructures of ZL201 alloy obtained by liquidus semi-continuous casting
ZL201合金液相线铸造与二次加热的合金组织
Effect of In-situ Al_2O_3 Particles on Microstructure of Aluminum Alloy by Near-liquidus Casting
原位Al_2O_3颗粒对近液相线铸造铝合金组织的影响
Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
GB/T6526-1986自熔合金粉末固-液相线温度区间的测定方法
Experimental Research on Abrasion and Corrosion of Oil Field Pipeline in Two-phase Flow of Fluid and Solid
油田管线液固两相流动磨蚀实验研究
Linear Analysis of Fréedericksz Transition in Nematic Liquid Crystals;
向列相液晶的Fréedericksz转变的线性分析
SYNTHESIS OF MoO_3 NANORODS VIA A SOLUTION APPROACH AT A LOW TEMPERATURE
低温液相合成路线制备六方相MoO_3纳米棒
Determination of UV Absorbers in Cosmetic by HPLC
高效液相色谱测定化妆品中的紫外线吸收剂
Study of the Nonlinear Scattering Equation for Au Nanoparticle in Solution
液相金纳米粒子非线性光散射方程的研究
Monte Carlo Simulation of the Vapor Liquid Phase Equilibrium for Linear Molecules and Mixture;
线性分子及其混合物汽液相平衡的Monte Carlo模拟