Experiment procedure on plate product technology of aluminum alloy 5083 from imperfection or non Homogeneous Treatment Process cast ingot is introduced.
介绍了5083铝合金欠均匀化或不均匀化生产板材工艺试验过程,比对了不同镁含量和不同均匀化程度对板材组织性能的影响,发现以上工艺变化对常规性能影响不大,对焊接等其他应用性能的影响有待进一步试验验证。
With a design scheme of DeNOx reactor the impact of the non-uniformity of reagents in flue gas on performance of DeNOx system is simulated.
模拟计算结果表明,烟气中氨的分布的不均匀性对脱硝装置的脱硝效率和氨逃逸有显著影响。
A graphic method is adopted to demonstrate how the non-uniformity is caused.
为提高光锥耦合ICCD成像系统的光响应均匀性,对光锥耦合过程造成光响应不均匀性的机理进行了分析,并用微观图解的方法清晰剖析不均匀性的产生机理。
It is considered that translation of catalyzer layer at 1 and 3 sections is atmolysis odds and the total loading amount of catalyzer is not enough.
分析三环分公司600 kt/a硫磺制酸装置Ⅰ系列转化率低的原因,认为是转化1、3段催化剂层分气不均,催化剂总装填量不够所致。
Study of fractal dimension on the unevenness of eutectic carbides of Cr12 steel;
Cr12钢共晶碳化物不均匀度的分维研究
We got a good result in the recognition of the unevenness of carbides with this frogram.
根据提出的评定合金工具钢共晶碳化物级别的数学模型,设计该模型的算法,开发了自动识别程序,对碳化物的不均匀度进行了识别,得到了较好的结果。
Using the program language, Delphi, a program has been written We got a good result in the recognition of the unevenness of carbides with computer.
本文根据模糊集理论,提出一种评定合金工具钢共晶碳化物级别的数学模型,并应用编程语言Delphi,编写了自动识别程序,借助计算机对碳化物的不均匀度进行了识别,得到了较好的结果。
3D Numerical Simulation of Intake Unevenness for Engines;
发动机进气系统不均匀性的三维数值模拟
With two foil gauges stuck on each prestressing tendon, discussion is made about the tensile stress unevenness of prestressing tendons on two tests of one-by-one-tendon stretch and 4-tendon simultaneous stretch individually.
对预应力筋受力不均匀性,采用在每根预应力筋上对称粘贴两应变片,分别以单根张拉和4根同时张拉的试验方法进行分析。
Heterogeneity of natural gases and the episodic charging process: a case study for Dongfang 11 gas field, Yinggehai basin.;
东方1-1气田天然气组成的不均一性与幕式充注
Heterogeneity of the QT interval in the inherited long QT syndrome:diagnostic implications;
先天性长QT综合征的QT间期不均一性:诊断上的意义
Characterization of Heterogeneity of Recombinant Human Plasminogen Kringle 5 Expressed by Pichia pastoris;
毕赤酵母表达重组hPK-5蛋白不均一性的鉴定