Influence of tooth profile parameters of inner-grooved copper tube on heat transfer performance
内螺纹铜管齿形参数对传热性能的影响
Through analysis it is concluded that for a given rock and given tooth profile,the cut-in displacement(depth)is in a linear relationship with cut-in load,the volume of breaking pit decreases with t.
对试验结果进行分析,得到了围压作用下对于所试验的岩石和齿形,压入载荷和压入位移成线性关系;岩石破碎坑的体积随压入载荷的增加而减小;在以相同齿形压入相同岩石的条件下,岩石的破碎面积和体积随围压的增加而减小。
The method analysing on detecting tooth form of gear hob;
齿轮滚刀齿形检测方法分析
The tooth form of small module gear is very complex and its hob possesses many parameters which are very complicated and tedious to be calculated.
小模数仪表圆弧齿轮是仪器仪表等精密机械中最主要的传动部件之一,其齿形参数相对较复杂,因此相应的共轭滚刀齿形计算也较复杂和繁琐,给实际应用带来困难。
These works summer up the common grounds of various PRC gear tooth forms, so they will b.
上述内容是各种纯滚齿形共同点的总结,是研究纯滚齿轮的基础。
Analysis system for tooth shape of general purpose double-circular-arc gear;
通用双圆弧齿轮齿形计算分析系统
Tooth shape and its pressure angle analysis on the cycloidal steel ball transmission;
摆线钢球传动齿形及其压力角分析
It should be fully considered when the tooth shape is designed.
利用上限法分析了内螺纹铜管齿型成形所需的单位挤压力,推导挤压力计算公式,指出在摩擦条件一定的情况下,齿顶角变化时存在一最小单位挤压力,在设计齿形时,应充分考虑齿顶角对挤压力的影响。
The investigation for the profile of asymmetrical involute gear;
非对称齿廓渐开线齿轮齿形的仿真设计分析
Analysis on profile errors of spur bevel gears;
直齿锥齿轮齿形误差分析
Theoretical Research of Optimum Design on Profile Shape of Gear Coupling;
齿轮联轴器齿形优化设计的理论分析
Gives a new method which designs tooth forms of pre-grinding hob according to thepartical demands on hob of gear,and designs a kind of pre-grinding hob used in high-speed trac-tion gears.
根据高速牵引齿轮对齿轮滚刀的特殊要求，提出了设计磨前滚刀齿形的新方法，并用此法设计了高速机车牵引齿轮的磨前滚刀。
Design of tooth form of die and electrode for precision forging spur bevel gear
直齿锥齿轮精锻模具和电极齿形设计
Research on Tooth-modification Technology of Fine-forming Straight-tooth Bevel Gear
精锻直齿锥齿轮齿形修形设计技术研究
RESEARCH ON TOOTH PROFILE CHAIN AND THE EVOLVENT TOOTH PROFILE SPROCKET
齿形链与渐开线齿形链轮啮合的研究
Based on gear engagement theory, the exact model of gear teeth is produced.
根据齿轮啮合原理,建立了轮齿的精确齿形。
The Meshing Researches on Asymmetrical Tooth Shape of Oscillating-teeth End-face Harmonic Gear;
活齿端面谐波齿轮非对称齿形的啮合研究
Tooth Form Emulation and Tooth Contact Analyse of Klingelnberg Cyclo-Palloid Spiral Bevel Gear;
克林贝格摆线齿锥齿轮的齿形仿真和接触分析
Amending the Shape of Pinion and Reducing the Round-gear Error;
修正小齿轮表面齿形降低圆弧齿轮传动误差
Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear
锥齿轮齿距及齿形偏差测量与分析方法
Study about the substitution of internal ring gear shape in star gear planet transmission
星齿行星传动中内齿圈齿形替代的研究
Study on Cold Extruding Forming Technology for the Driving Gear of Saw-tooth Inner Gear
锯齿形内齿主动齿轮冷挤压成型技术研究
Optimal Design on the Rectilinear-arc Teeth Profile in Annular Gear Pair
直线—圆弧齿廓内齿轮副的齿形优化设计
Process for the Cold Precision Forging of Spur Gears and the Modification of Tooth Profile;
直齿圆柱齿轮冷精锻成形数值模拟及齿形修形研究
Forming Mechanism of Tooth Flank Burr in Cutting Gear
齿轮齿形切削加工中的毛刺生成机理
Quadruple-arc Gear Optimization Based on ANSYS
基于ANSYS的四圆弧齿轮齿形优化
NC sector gear shaper
数控扇形齿轮插齿机
Worn teeth on ring gear or drive pinion gear.
环形齿轮或驱动小齿轮上齿磨损。
Calculation on deformation of spur gear teeth based on precise model of teeth profile
基于精确齿廓模型的直齿轮轮齿变形数值计算
The Researches on Modification of Tooth Surface of End Face Harmonic Gear Drive of Oscillating Teeth;
活齿端面谐波齿轮啮合副齿面修形的研究