Study on Ni-Mn Alloy Electroforming of Nozzle and Its Fracture Problem;
喷管的镍锰合金电铸及其开裂问题的研究
Quality Control of Ni-Mn Alloy Electroforming of Thin-wall Revolving Part;
薄壁回转体零件镍锰合金电铸的质量控制
Preparation of high-hardness electroformed gold artifact obtained from a weakly acidic gold potassium cyanide electroforming bath;
高硬度弱酸性氰化亚金钾电铸黄金工艺品的研制
Study on electroformed nickel-cobalt alloy on the surface of composite mould;
复合材料模具表面电铸镍钴合金研究
The application of a new conformal anode to electroform the complex revolving parts;
电铸复杂回转零件时新型象形阳极的应用
Characterisation of nickel sulphamate electroforming solution using rotating cylinder Hull cell;
利用旋转圆筒赫尔槽表征氨基磺酸镍电铸液(英文)
Free-standing diamond grain-nickel composite films were deposited by electrotyping method at the condition of low internal stress electrolytic solution,with pH value of 3.
用电铸方法,采用低应力电镀液,制备出了自支撑金刚石-镍复合膜。
An artificial neural network (ANN) was used to predict diamond grains content, thickness and micro morphology of free-standing diamond grains-nickel composite film by electrotyping.
用人工神经网络预测了电铸自支撑金刚石-镍复合膜中金刚石颗粒的含量、复合膜的厚度和表面微观形貌。
The composite films were prepared by using electrotyping method.
本文研究了电铸工艺制备的金刚石-金属复合膜的微结构及其内应力，探讨了电镀工艺参数对复合膜品质的影响；研制出了金刚石颗粒分布均匀、厚度均匀、内应力小的超薄大面积自支撑金刚石-镍复合膜；探讨了复合膜的后续加工工艺，研制出了超薄金刚石-金属复合膜切割片，并对其切割性能进行了初步试用研究。
Experimental research on the electro-magnetic field distributing regularity of placing nozzle area in electro-magnetic cast-rolling process;
电磁铸轧铸嘴区电磁场分布规律及其作用分析
The supporting plane board for nozzle is the pivotal component in electro-magnetic cast-rolling technique.
铸嘴支撑面板是电磁铸轧工艺的关键部件,其结构稳定性直接关系到铸嘴的平面稳定性。
The process of making an electrotype.
电铸制作电铸版的过程
electrotype alloys
电铸板用铅基压铸合金
Electro: Short for Electrotype.
电铸版: Electrotype的简写。
Curved plates: Electros or stereos shaped for use on rotary printing machines.
弧形板:轮转机手的电铸版或铅铸版。
Research on relation between additive content in the electroforming solution and microstructure and mechanical properties of electroformed nickel
电铸液中添加剂含量与电铸镍晶体组织和性能的关系研究
Experimental results indicate that pulse current causes denser deposit, which leads to the decrease of EDM tool wear ratio.
当电铸层作为电火花加工电极时，脉冲电流电铸可以降低电极损耗率。
Electroforming Tool Electrode Used in Electrical Discharge Machining of Engine Blisk;
电火花加工所用工具电极的电铸制造技术研究
galvanoplastic screen process by laser engraving
激光雕刻[直接]电铸花网工艺
GDD (galvano direct design screen making process)
电铸直接花样筛网制造法
non-electric type-metal furnace for type-founding machines
非电力铸铅字炉,铸字设备用
vertical motor rotator die casting machine
立式电机转子压铸机
technology of investing shell mold by electrophoresis
电泳复合精铸制壳工艺
As-cast Microstructure and Mechanical Properties of Electromagnetic Casting 2E12 Aluminum Alloy Billets
电磁铸造2E12铝合金的铸态组织与力学性能
Practice of As-cast QT450-15 Nodular Graphite Iron Produced by Electric Arc Furnace Smelting
电弧炉熔炼生产铸态QT450-15球墨铸铁的实践
Essentials of EIC system in Baosteel EAF/billet CC project
宝钢电炉、圆(方)坯连铸三电系统概要
The resistivity evolution with temperature of 7050 aluminium alloy by different casting methods
普通铸造和低频电磁铸造7050铝合金电阻率-温度特性的研究
W: Coating in casting、 referacetory material dye electrode compound etc.
铸造材料、火材料、料、电极糊等的原料。
cupola ,non-electric, for type-founding machines
铸字设备用非电力冲天炉