Analysis and Discussion of Butt Welding Quality\= on New Metallic Card Clothing;
新型金属针布接头对焊质量的分析与探讨
The upset formation process of rail (U71Mn) butt welding was test by thermal and mechanical simulation using Gleeble-2000 simulator.
采用Gleeble-2000热模拟试验机,对高速铁路轨道用U71Mn钢轨钢的对焊顶锻变形过程进行了热力模拟试验。
This paper introduces the influence of welding condition upon the quality of tube-web-tube joints welded by resistence butt welding, such as the optimization of parameters, adding in auxiliary electrodes, adding in an ideal electrical conductivity electrode.
通过焊接工艺在数优化、设置辅助电极及理想导电条件的多项试验，系统研究了间断鳍片管电阻对焊接头质量问题，指出其主要影响因素是未焊透缺陷。
UDP based implementation of peer to peer communication;
基于UDP的端对端通讯的原理及实现
Butt-welding ends for steel pipe flanges
GB/T9124-1988钢制管法兰对焊端部
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
ADJUSTED PRESSURE/ TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/度额定值?
Subcontractor is responsible for trimming the random ends to the correct size (dimensions) final fit-up, end preparation and welding.
“分包商负责将管端切削至合适的尺寸、坡口加工和组对焊接。”
ADJUSTED PRESSURE/TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/温度额定值?
Effects of Several Factors on Plastic Zone at the Cracking Tip of Welded Joint with FEM;
采用有限元分析多因素对焊接接头裂纹尖端塑性区的影响
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
Cause Analysis and Prevention Measure of Terminal Crack of Submerge-arc Welding Longtitudinal Weld
埋弧焊纵焊缝终端裂纹原因分析及预防措施
end-to-end protocol
端对端协议 -网络
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
Three lead wires are soldered to the anchor terminals.
在固定接线端子上焊有三根导线。
With the result the coating projects beyond the molten end of the electrode metal.
结果药皮伸延于焊条金属芯熔端之外。
Brazing technology for end-ring and conducting bar of asynchronous traction motor
异步牵引电动机端环与导条钎焊技术
Study on the Numerical Simulation for Resistance Spot Welding with Rectangular Tip Electrode;
矩形端面电极电阻点焊数值模拟研究
Welding failure analysis of tin coating for the terminal electrode of MLCC
MLCC端电极Sn镀层的焊接失效分析
Analysis on Welding Failure of Terminal Electrode of Multilayer Ceramic Capacitors by SEM
基于SEM的MLCC端电极焊接失效分析
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。