Effect of sequential action of vacuum thermocirculation and proton irradiation on properties of methyl silicone rubber;
真空热循环与质子辐照顺次作用对甲基硅橡胶性能的影响
Radiation effect of proton on methyl silicone rubber was investigated using a groundbased simulator for space radiation environment.
利用空间辐照环境地面模拟设备研究了质子辐照对甲基硅橡胶的破坏,建立了甲基硅橡胶的破坏模型。
Synergistic radiation effect on methyl silicone rubber of protons and electrons was investigated using a ground-based simulator for space radiation environment.
利用空间辐照环境模拟设备对甲基硅橡胶进行了质子、电子综合辐照试验 。
Development of domestic fluorosilicone rubber;
国内氟硅橡胶的研究进展
Preparation of fluorosilicone rubber with good adhesive properties;
具有良好粘接性能的氟硅橡胶的研制
Effects on the heat resistant properties of copolymerized fluorosilicone rubber to metal oxide;
金属氧化物对共聚氟硅橡胶耐热性能的影响
Study on one-component condensating type RTV fluorosilicone adhesive;
单组分缩合型室温硫化氟硅橡胶胶粘剂的研制
While fluorosilicone rubber SKTFT-100 is 0.
研究了SKTFT 5 0共聚氟硅橡胶的性能 ,尤其是其低温性能 ,并与通用氟硅橡胶SKTFT 1 0 0进行了对比。
The thermal ageing properties in air and adhesion at 200 ℃of the heat curing fluorosilicone adhesive were investigated.
研究了氟硅橡胶胶粘剂的热空气老化性能和高温粘接性能。
Synthesis and Properties of Terminal Si-H Liquid Fluorosilicone
端硅氢活性氟硅橡胶的制备及基本性能的研究
Synthesis and Properties of Hydroxyl-erminated Liquid Fluorosilicone Elastomer with Room-Temperature Vulcanization;
室温硫化羟基封端液体氟硅橡胶的合成与性能研究
Water sorption and solubility of a new type of fluorine silicone denture soft lining materials
新型氟硅橡胶义齿软衬材料吸水性和溶解性的研究
The Preparation, Structure and Properties of Fluororubber/Silicone Rubber Blends
氟橡胶/硅橡胶共混胶的制备、结构与性能研究
Effect of Fumed Silica on Properties of FKM/MVQ Blends
气相白炭黑对氟橡胶/硅橡胶共混胶性能的影响
Compatibilization Effect of FKM-g-VTEO in Fluororubber/Silicone Rubber Blends
FKM-g-VTEO对氟橡胶/硅橡胶共混物的增容作用
Properties of fluororubber/methyl vinyl silicone rubber blends elastomer
氟橡胶/甲基乙烯基硅橡胶共混弹性体的性能
Present situation of fluoro rubber and silicone rubber industries in China and some advice about them;
我国氟、硅橡胶工业发展现状及建议
silicone rubber
硅(氧)橡胶, 硅酮橡胶
Common type: nitrile butadiene oil resistant rubber. Fluoroelastomer and silicon rubber are used in applicable situation of high and low temperature. Use relevant lubricant.
普通型：丁晴耐油橡胶。高温，低温的应用场合，使用氟橡胶和硅橡胶。使用相应的润滑剂。
NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high and low temperature applications Viton or Silicone.
在常温工作条件下使用丁腈橡胶，在高温或低温时采用氟橡胶或硅橡胶。
Properties of fluoroelastomer/ethylene-propylene-diene rubber blends
氟橡胶/三元乙丙橡胶并用胶的性能
The Preparation and Studies of PDMS-PVDF Pervaporation Ethanol-permseletive Composite Membrane;
优先透醇的硅橡胶—聚偏氟乙烯复合渗透蒸发膜的制备与性能研究
Study on preparation of vinyl-terminated poly(methyltrifluoropropyl-dimethyl)siloxane and properties of its rubber
乙烯基封端氟硅共聚物的制备及其橡胶性能的研究
Study on the Properties of FKM/CO Blends
氯醚橡胶/氟橡胶共混物性能的研究
Preparation and Study of Silicone Rubber/EPDM Foam
硅橡胶/三元乙丙橡胶泡沫合金的研制
Multiplex Damping Materials of Metal Rubber-Silicone Rubber
金属橡胶/硅橡胶复合阻尼材料的研究
methyl phenyl vinyl silicone rubber
甲基苯基乙烯基硅橡胶