Test program on the shear behavior of stressed skin diaphragm using profiled sheet connected by the self-tapping screws has been carried out.
通过对压型钢板采用自攻螺钉连接的受力蒙皮进行剪切性能的试验,探讨了这类蒙皮的破坏模式和抗剪极限承载力,研究了板型、连接件布置和檩条间距等因素对蒙皮抗剪性能的影响,介绍了《欧洲蒙皮设计建议》(简称EUR)中此类蒙皮的抗剪强度和抗剪刚度的简化计算公式。
Several Problems of Master Design of the Low Frequency Vibration Tapping Machine Tool;
低频振动攻螺纹机床总体方案设计中的几个问题
Pilot Production of Deep Cold-Working Self-tapping Screw of 304HC Stainless Steel;
304HC不锈钢深冷变形自攻螺钉的试制
In China,profiled steel sheeting claddings are commonly crest-fixed to members with self-tapping screws in order to improve its waterproof performance.
为了满足防水要求,目前我国在蒙皮连接上广泛采用自攻螺钉在压型钢板的波峰处与构件相连的形式。
Combined with practical construction,the author introduces the fixed form of color steel plate installation,lap joint of side and end,selection of self-tapping screw,and setting of ribbon skylight,illustrates the methods to install color steel plate,and points out the problems should be noticed in installation construction,in order to ensure construction quality.
结合施工实践,对彩钢板安装的固定方式、侧向和端部搭接、自攻螺钉的选用、采光带的设置等方面进行了介绍,并阐述了彩钢板的安装方法,指出了安装施工中需注意的问题,以保证施工质量。
To analyze corresponding relation between waster appearing in the course of producing of tapping screw and quality of steel.
分析自攻螺钉生产过程出现的废品与钢质量的对应关系。
5 tapping screw used for washing machine was analyzed by means of optical emission spectrometry,micro-hardness tester,optical microscopy,the scanning electron microscopy and energy dispersive X-ray spectrometer.
5自攻螺钉的断裂原因进行了分析。
Tapping screws thread
GB/T5280-1985自攻螺钉用螺纹
Hexagon head tapping screws
GB/T5285-1985六角头自攻螺钉
Dry wall screws
GB/T14210-1993墙板自攻螺钉
Cross recessed pan head self-drilling tapping screws
GB/T15856.1-1995十字槽盘头自钻自攻螺钉
Mechanical properties of fasteners--Self-drilling tapping screws
GB/T3098.11-1995紧固件机械性能自钻自攻螺钉
Cross recessed raised countersunk head self-drilling tapping screws
GB/T15856.3-1995十字槽半沉头自钻自攻螺钉
Cross recessed countersunk head self-drilling tapping screws
GB/T15856.2-1995十字槽沉头自钻自攻螺钉
Cross recessed hexagon head tapping screws with indentation
GB/T9456-1988十字槽凹穴六角自攻螺钉
Slotted countersunk head tapping screws
GB/T5283-1985开槽沉头自攻螺钉
Hexagon head tapping screws with collar
GB/T16824.1-1997六角凸缘自攻螺钉
Big washer for tapping screw assembly
GB/T9074.30-1988自攻螺钉组合件用大垫圈
Slotted raised countersunk head tapping screws
GB/T5284-1985开槽半沉头自攻螺钉
Slotted pan head tapping screws
GB/T5282-1985开槽盘头自攻螺钉
Cross recessed pan head tapping screws
GB/T845-1985十字槽盘头自攻螺钉
Cross recessed countersunk head tapping screws
GB/T846-1985十字槽沉头自攻螺钉
Cross recessed raised countersunk head tapping screws
GB/T847-1985十字槽半沉头自攻螺钉
Small washer for tapping screw assembly
GB/T9074.29-1988自攻螺钉组合件用平垫圈
Mechanical properties of fasteners--Tapping screws
GB/T3098.5-1985紧固件机械性能自攻螺钉