Based on the mathematical theory,the mathematical models of the cooking technologyin ramie degumming are established by utilizing the 4 factors'central rotatal experimetnal de-sign of Box-Hunter and by means of electronic computer.
本文以数学理论为依据,以电子计算机为辅助工具,利用四因子二次通用旋转组合设计试验计划,建立了苎麻脱胶煮练工艺的数学模型,首次定性定量地给出了精干麻质量随煮练工艺参数的改变而变化的规律,对于苎麻高效脱胶的研究和工业化生产都有一定的积极意
This paper discusses the problem of measuring high residual gum content in degummed ramie fibre by analysing the transference of ramic gum in alkali cooking process.
本文根据对苎麻碱煮过程中胶质转移动态属性的分析,讨论了GB5889-86试验方法在测定高残胶率精干麻时所存在的主要问题,探讨了多级碱煮测定的设想,通过分析和实验,对GB5889-86试验方法提出了修正意见,并给出了修正值,使之能够适用于高残胶率精干麻的测定,减少了系统误差,提高了测定精度。
In this study,the influence of the tresis vulnus quantity on the gum output and the growth of trees was tested.
)的创口数对出胶量和树木生长的影响试验进行了阐述,结论是成熟林或是过熟林林带沙枣树的出胶量随创口数的增加呈指数增加,并且成熟林的出胶量大于过熟林;单株10×20cm2的创口,不会影响树木生长。
The causes for particle formation on the cathodic surface in copper electrolytic refine were analysed based on the experimental results and the amount of additives were optimized to be: hydrochloric acid 25 mg/L, thiourea starting with 5 6 mg/L and comsuming 73 g per ton of metallic copper, glue starting with 8 mg/L and comsuming 120 g per ton of metallic copper.
6mg L ,每生产 1tCu补加量为 73g ;胶起始加入量为 8mg L ,每生产 1tCu补加量为 12 0g。
Compared with other materials and tools,glue and kalinite have attracted less attention.
相对其他材料和工具而言,胶和矾这两种材料并不太受人重视,但它们却和中国的绘画艺术紧密联系,其表现是多方面的。
Effect of pyrolysis atmosphere on properties of BLT ferroelectric films deposited by sol-gel method;
热分解气氛对溶胶-凝胶法制备BLT铁电薄膜性能的影响
Chemistry Mechanism Discussion of Preparing HAP with Sol-gel Method;
溶胶-凝胶法制备羟基磷灰石粉体化学机理分析
Synthesis of the blue long afterglow phosphor Sr_2MgSi_2O_7:Eu,Dy by sol-gel method and its luminescent properties;
溶胶-凝胶法合成蓝色长余辉材料Sr_2MgSi_2O_7:Eu,Dy及其发光特性
The effect of different coagulation methods on the mechanical properties of skin rubber;
凝固方法对胶清橡胶力学性能的影响
Study on mechanical property of nano-SiO_2/skin rubber composite;
纳米SiO_2/胶清橡胶复合材料力学性能的研究
Titania nanoparticles were then filled into the gaps among the nanorods through an infiltration sol–gel procedure to form a composite titania film with an ordered nanostructure.
用双氧水低温氧化金属钛片的方法制备了TiO2纳米棒阵列,并以该阵列为基体,用浸渍渗透溶胶–凝胶技术制备了TiO2纳米颗粒嵌入TiO2纳米棒阵列基体的复合结构薄膜。
Preparation of high temperature insulation paint by Sol-Gel process;
溶胶-凝胶法制备耐高温绝缘涂料
Nanometer scale TiO2 film was prepared on glass substrate with film thickness less than 100 nm,crystal size in the range of 10~30 nm by sol-gel process combining with spin-coating technology.
以玻璃为基底,采用溶胶-凝胶法,利用旋涂技术在玻璃表面制备了膜厚小于100 nm,粒径在10~30 nm之间的纳米TiO2薄膜;利用XRD,AFM系统研究了煅烧温度及膜厚对薄膜亲水性的影响。
The stable ZrO2 sol is prepared by sol-gel process with Zr(O-Bu)4 as the starting materials in this paper .
以锆酸丁酯为前驱体,采用溶胶-凝胶工艺,制备了性能稳定的ZrO_2溶胶,通过在其中添加有机粘合剂PVP和旋涂镀膜法分别制得了ZrO2薄膜和ZrO2-PVP复合薄膜。
gum dragon=gum tragacanth)
黄耆胶, 黄耆树胶
One-shot binding: Perfect binding with one application of hot-melt glue only. As distinct from Two-shot binding.
一次胶胶装:用热熔胶涂书脊一次的胶装。有别于两次胶胶装。
Raw natural rubber--Smoked sheets
GB/T8089-1987天然生胶烟胶片
rubber materials for vibration isolators
防振橡胶用橡胶材料
lyophilic colloid
亲液溶胶,亲液胶体
perfect Binding
无线胶订,胶粘装订
latex from tapped rubber trees.
乳胶从橡胶树中抽出。
Auto glue injection m/c (thermo-plastic glue)
自动射胶机（热熔胶）
a colloid is a more solid form than a sol.
比溶胶更致密的胶体。
heat lamination
火焰胶合，胶熔层压
silicone rubber
硅(氧)橡胶, 硅酮橡胶
To exude or form gum.
结胶分泌或形成树胶
automatic coating machine
自动涂胶机（涂感光胶用）
colloided silica
胶态硅石，胶态氧化硅
Fumo plastic, white latex, pressure, urine aldehyde plastic, ethanol diluted materials, construction plastic, strong plastic, Shuangzufen plastic, furan resins such as plastic manufacturing.
复膜胶、白乳胶、压敏胶、尿醛胶、乙醇稀料、建筑胶、大力胶、双组份胶、呋喃树脂胶等类制造。
The gum of this plant.
黄芪胶这种植物的胶
Rubber transfusion tubes
GB4491-1993橡胶输血胶管
Enclosed in or formed into a capsule.
包入胶囊，形成胶囊