The low melting point Ga-Ag-Sn liquid state alloy prepared by vacuum melting method was studied.
采用真空冶炼法制备了低熔点的Ga-Ag-Sn液态合金,分析了Ga含量与液态合金熔点的关系。
Influences of low melting point and semi - crystalline EVA on the structure, conductive behavior and positive temperature coefficient (PTC) of PS-HI/CB system were studied by means of XRD, DSC and SEM.
采用XRD、DSC、SEM等研究了低熔点、半结晶聚合物EVA对非晶聚合物高抗冲聚苯乙烯／炭黑(PS-HI／ CB)复合材料的结构、导电性和正温度系数(PTC)效应的影响,结果表明,EVA,可提高复合材料的PTC强度,当PS- HI/EVA/CB=70:30:30时复合材料的PTC强度由不加EVA的2。
By employing the melt-spinning technique, an alloy, which used to be brittle, was made into a highly tough alloy-strip, and the low melting point of which was maintained.
采用熔体急冷新技术使原来呈脆性的低熔点合金被加工成高韧性的条带。
The results indicated the bismaleimide showed lower melting point which had decreased 39℃ because of methyl side-group.
通过甲基对苯二酚和对马来酰亚胺基苯甲酸,制得了一种低熔点的酯类液晶双马来酰亚胺。
This paper discusses the technical requirements mierocrystal sealing lass-ceramics with lower melting point nd the matching sealing conditions of sealed pieces.
探讨低熔点微晶封接玻璃的技术要求和封接件的匹配封接条件，并给出部分低熔点微晶封接玻璃的性质和典型封接工艺。
low-heat-duty clay
低品位［低熔点］耐火粘土
any low-fusing alloy used in cheoplasty (molding artificial teeth).
低熔点合金，用于低熔铸型（假牙成型）。
Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone
CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究
darcet's alloy (bismuch predominating)
铋铅锡低熔点合金,（铋为主要成分）
Study on the Non-eutectic Sn-Bi Solders with Low Melting Point;
Sn-Bi系低熔点非共晶无铅焊料的研究
Investigation on Low Temperature Sn-Zn Base Lead-Free Solder Alloys
低熔点Sn-Zn系无铅钎料的研究
Research on the Characteristic of Bi2O3-ZnO-B2O3 System Low-melting Sealing Glass
Bi_2O_3-ZnO-B_2O_3低熔点封接玻璃的性能研究
Development of Low Melting-point Glass with PbO&B_2O_3 Matrix and its Properties
以PbO和B_2O_3为基质的低熔点玻璃的研制
Rubber protective wax is made from paraffin wax with low melting point, paraffin wax with high melting point and polyethylene wax.
橡胶防护蜡，是由低熔点石蜡、高熔点石蜡、微晶蜡和聚乙烯蜡制成的。
Synthesis of Solid Solutions and Intermetallic Compounds by Mechanical Alloying;
机械合金化制备高熔点、低熔点金属固溶体和化合物的研究
an alloy with a low melting point and used as solder and in safety plugs and sprinkler fuses.
一种低熔点的合金，用作焊料，亦用于安全拴和喷水熔丝。
Coal Ash Low Temperature Molten Matrix Formation Characteristics under Fluidized Gasification;
流化床气化条件下煤灰低熔点共融物形成特性
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
Research on Interaction between Cerium and the Low Melting Point Metallic Element Lead in Steel;
钢中稀土铈与低熔点金属铅的作用规律研究
Research on Interaction between Rare Earth Cerium and Low Melting Point Metallic Tin in Steel;
钢中稀土铈与低熔点金属锡的作用规律研究
The Application of Low-melting Alloy on Compound Material Injection Molding Process;
低熔点合金在复合材料注射成型工艺中的应用
eutectic brazing alloy
低共熔点软钎焊合金
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。