Rapid multiple slurry-preparation technology of melt treatment and reversible electromagnetic stirring;
熔体处理和双向电磁搅拌复合快速制浆技术
Effect of ultrasonically melt treatment method on solidification structure of pure aluminum ingot;
超声波熔体处理方法对纯铝铸锭凝固组织的影响
Effect of melt treatment method on degassing efficiency of ultrasonically refined pure aluminum ingots;
熔体处理方法对纯铝铸锭超声波除气的影响
The microstructure of the as-cast high chromium cast iron alloy after remelting treatment was investigated.
采用固液混合铸造技术制备了高铬铸铁合金坯料,研究了固液混合铸造高铬铸铁坯料的重熔组织及重熔处理对坯料中可能存在的缺陷的修复效果。
Through the surface remelting treatment of c ast iron,the kinds and mechanism of the remelted layer fissure have been explor ed an d the prevention measures also have been discussed from three ways of process pa rameter,matrix structure and preheating temperature.
通过对不同基体的灰口铸铁的钨极氩弧重熔处理,详细研究了重熔层裂纹的形式和形成原因,从工艺参数、基体组织和预热温度三方面探讨了裂纹的防止措施。
Tensile Properties of Al Sheet at Elevated Temperature for Pressure Can Prepared by Different Melt-treatment Methods;
经不同熔体处理的罐用铝材的高温拉伸性能试验
Hot deformation microstructure of aluminum sheets prepared by different melt-treatments used for easy-open can;
经不同熔体处理的易拉罐用铝材的热压缩变形组织
Influence of melt-treatment and homogenization on microstructure and mechanical properties has been studied systematically and deeply with the aids of some modern .
针对目前我国铝材生产与研究中对内在冶金缺陷的影响作用重视不足、液态(熔体)处理与各种固态处理均是按各自系统独立进行研究的现状,作者结合本课题组的前期研究基础,以具有实用价值且量大面广的易拉罐用铝材(Al-Mn-Mg合金)作为研究对象,提出从改善铝材冶金质量这一关键技术入手,将铝材的处理状态(熔体处理和均匀化)与热变形加工有机地结合起来进行研究的新思路。
Experimental Study on the Melting of Municipal Solid Waste Incineration Fly Ash;
城市垃圾焚烧飞灰熔融处理实验研究
Study on Melting Properties and Behavior of Incineration Ash during Gasification and Melting Process of Municipal Solid Waste
气化熔融处理城市生活垃圾时灰渣的熔融特性及行为研究
Research on the Melting Treatment Technique of Municipal Solid Waste Incinerator Residues;
城市生活垃圾焚烧灰渣熔融处理技术研究
Study of Melting Furnace's Temperature in Disposing MSW
垃圾气化熔融处理过程炉温的计算分析
Advance on the Study and Application of Molten Salt in Waste Treatment
熔融盐在废弃物处理中的应用研究进展
Experimental Study on Coal Gasification-Swirling Melting Technology for Integrated Treatment of MSWI Fly Ash
燃煤气化-旋风熔融集成处理焚烧飞灰的试验研究
Effect of Compound Additive on Melting and Solidification of Fly Ash from Waste Incinerator
复合添加剂对垃圾焚烧飞灰熔融固化处理的影响
Influencing Factors in Molten Aluminum Treating by Elec-flux Process
电熔剂法净化处理铝熔体的影响因素
Study on Weld Pool Image Processing and Model Identification of GTAW;
GTAW熔池图像处理及熔池辨识模型研究
Melting process of polymer under pure vibration force field (Ⅰ) Theoretical model and melting mechanism
纯振动场作用下聚合物熔融塑化过程(Ⅰ)理论模型及熔融机理
At last, some suggestions on how to develop gasifying and melting technology in Chinese were propose in respect to traits and treatment of its MSW.
并结合我国城市垃圾的特点和垃圾处理的实际情况,提出了发展气化熔融技术的几点建议。
Experimental Study on Vitrification of Fly Ashes from Incinerator with a DC Thermal Plasma Torch;
直流热等离子体技术应用于熔融固化处理垃圾焚烧飞灰的试验研究
Melt Index Prediction by BP Neural Networks Based on Canonical Correlation Analysis and Data Auto-regression
基于典型相关分析和数据自回归处理的BP神经网络在聚丙烯熔融指数预报中的应用
Cooling the melt( in a quiescent state) to achieve the desired solid fraction.
冷却熔融金属（态下）得理想的固态粒度。
Physical Simulation of Raceway in COREX Melter Gasifier
COREX熔融气化炉风口回旋区的物理模拟
capable of being melted and fused.
可以被熔化或熔融的。
Melt Treatment Structure of Al-Si Alloys;
Al-Si合金的熔体处理结构研究
Ultrasonic Melt Treatment and Solidification of 7055 Aluminum Alloy;
7055铝合金熔体超声处理与凝固研究