The tap changer control system is important component of converter control system.
分接头控制是换流器控制系统中重要组成部分。
The article mainly introduces the converter firing control system and the tap changer control system.
HVDC输电系统运行的关键是换流触发控制(CFC)实现快速变化和精确的控制以及分接头控制器(TCC)处理稳态控制。
The elemental diffusion is the dominant factor of joint forming.
元素的扩散是控制接头形成的主要因素。
TRANS CONTROL RELAY CONNECTOR
变速箱控制继电器接头
TRANSMISSION CONTROL MODULE CONNECTOR
变速箱控制模组接头
RECONNECT THE HYDRAULIC CONTROL UNIT 6-WAY CONNECTOR.
重新连接液压控制单元６路接头
LEAVE BACKPROBE CONNECTED AND RECONNECT THE BODY CONTROL MODULE I/P 10-WAY CONNECTOR.
去掉探头且连接泵体控制摸数Ｉ／Ｐ１０－路接头。
DISCONNECT THE BODY 20-WAY CONNECTOR (AT BODY CONTROL MODULE).
拆除车身２０－路接头（位于车身控制部件）。
Airbag Control Module Connector Removal
安全气囊控制模组接头拆除
AIRBAG CONTROL MODULE 4-WAY CONNECTOR
安全气囊控制模组４－路接头
DISCONNECT THE BODY CONTROL MODULE BODY 20-WAY CONNECTOR.
断开车体控制模块体２０－路接头。＊＊
GAIN ACCESS TO THE BODY CONTROL MODULE ENG 14 WAY CONNECTOR
获取到车身控制部件引擎１４路接头
Do not disconnect the connectors or remove the body control module from the junction block.
不要从功能块断开接头或移走控制体
Lower the overhead console far enough to access the two wire harness connectors.
降低正顶控制台，使得能接触到两个线束的接头。
Analysis and Preventive Measures of Quality Control of D Type Welded Joint in Pressure Vessel;
压力容器D类焊接接头质量分析及控制措施
Controlling on Microstructure and Performances of Welding Joints of 800MPa Ultra-Fine Grained Steel
800MPa超细晶粒钢焊接接头组织和性能控制
Plug the wire harness connector into the back of the heater-A/C control.
将电线束接头插入加热器-空调控制后部
Lighting pole welding deformation control in beacon engineering at Baotou Stadium
包头市体育场灯塔工程灯杆焊接变形控制
Design of DVB-T Dual-tuner Control System Based on Diversity Reception;
基于分集接收的DVB-T双高频头控制系统设计
18-8 Austenite stainless steel joint measurements about Intercrystalline Corrosion;
18-8奥氏体不锈钢接头晶间腐蚀的控制