Vulcanization properties of carboxylated nitrile rubber;
羧基丁腈橡胶的硫化性能
Microphase structure and dynamic mechanical properties of carboxylated nitrile rubber-based damping composites
羧基丁腈橡胶基阻尼复合材料的相态结构及动态力学性能
The blends of chlorosulfonated polyethylene(CSM)and carboxylated nitrile rubber(XNBR) could be vulcanized during molding at 185 ℃× 60 min in the absence of any vulcanizing agent.
在没有任何硫化剂的条件下,氯磺化聚乙烯(CSM)和羧基丁腈橡胶(XNBR)的共混物(质量比1∶1)能在185℃×60min下模压硫化。
Preparation of powdered carboxyl nitrile rubber/polyvinyl chloride blend;
粉末羧基丁腈橡胶/聚氯乙烯共混胶的研制
In this paper,we choose carboxyl nitrile rubber,polysulfide rubber and hydroxyl polysiloxane as toughners and evaluate the effect of toughened epoxy resin with impact strength,bend strength and tensile shear strength.
以羧基丁腈橡胶、聚硫橡胶和羟基聚硅氧烷为增韧剂,以冲击强度、弯曲强度和拉伸剪切强度来评价环氧树脂的增韧效果。
A new nanometer carboxy terminated nitrile rubber was used to modify phenolic resin in this paper.
采用新型纳米端羧基丁腈橡胶增韧改性酚醛树脂,通过傅立叶红外光谱(FTIR)、综合热分析(DTA-TG)等研究了改性树脂的界面反应和耐热性,研究表明,超细羧基丁腈橡胶表面存在大量的活性基团,可以与酚醛树脂发生相互作用,因此可以同时提高改性树脂的耐热性和冲击强度;力学性能研究表明采用改性树脂制备的树脂磨具的强度和韧性都得到提高,同时材料的硬度几乎不变,因此该树脂可广泛应用于精磨和抛光磨具中。
Curing Process and Properties of BCE/CTBN Blends;
双酚A型氰酸酯/端羧基丁腈橡胶共混物的制备工艺和性能
Pre-reaction mechanism of epoxy resin(EP) and CTBN was verified by FT-IR,it was reason that the hydroxyl was formed by esterification reactions between carboxyl and epoxy group.
利用红外光谱确认了环氧树脂(EP)与端羧基丁腈橡胶(CTBN)的预聚反应机理是-COOH与环氧基进行酯化反应生成-OH基团,其最佳反应条件是70℃、3 h。
In the room temperature,a modified epoxy resin(I) prepared from CTBN and epoxy resin AG-80 was mixed proportionately as component A,with the modified epoxy resin(II) from the reaction between silicon-boron resin and bisphenol-A epoxy resin.
用端羧基丁腈橡胶(CTBN)与环氧树脂AG-80反应制得改性环氧树脂(I);以硅硼树脂与双酚A型环氧树脂反应得到改性环氧树脂(Ⅱ);将改性环氧树脂(I)和(II)按比例在室温下充分混匀为A组分,把固化剂、阻燃剂等混配成B组分,将A和B组分按不同配比均匀混合配成灌封材料,并以IR、拉力机等仪器分别对改性树脂、灌封材料进行结构及力学性能的测试表征。
The compound of polyvinyl chloride(PVC) and power of waste carboxylated nitrile rubber(WXNBR) was grafted to modify with acrylic acid(AAc).
以丙烯酸(AAc)接枝改性聚氯乙烯(PVC)和废羧基丁腈橡胶(WXNBR)共混物,在界面间生成化学键,增大两相界面间粘合力,改善了共混物的力学性能。
The structure and dynamic mechanical properties of unpressed and pressed composites consisting of carboxylated nitrile rubber(XNBR) and hindered phenol compound 2,2′-methylenebis-(6-tertbutyl-4-methyl-phenol)(AO-2246) were investigated respectively.
将羧基丁腈橡胶(XNBR)和受阻酚2,2′-亚甲基双-(4-甲基-6-叔丁基苯酚)(AO-2246)混合制备出挤压和未挤压AO-2246/XNBR复合材料,并对其结构及动态力学性能进行了研究。
Preparation of HMVC-NBR and Its Application in the Heat-Resistance Epoxy Adhesives
羧基丁腈橡胶的制备及在耐温环氧胶中的应用
Blending Modification of Polyethylene/Gelatin and Carboxylated Nitrile Rubber/Gelatin by Using Reactive Compatibilization;
聚乙烯/明胶、羧基丁腈橡胶/明胶反应增容共混改性研究
Microphase structure and dynamic mechanical properties of carboxylated nitrile rubber-based damping composites
羧基丁腈橡胶基阻尼复合材料的相态结构及动态力学性能
Preparation and Property Study of High-performance Damping Materials Based on Carboxylated Nitrile Rubber
羧基丁腈橡胶系高性能阻尼材料的制备和性能研究
Structure and dynamic mechanical properties of hindered phenol/carboxylated nitrile rubber composites
受阻酚/羧基丁腈橡胶复合材料的结构及动态力学性能
Synthesis of liquid random carboxylic butadiene-acrylonitrile rubber with high nitrile group content
高腈基含量无规羧基丁腈液体橡胶的合成
Modification of Epoxy Resin with CTBN Rubber
羧基液体丁腈橡胶增韧改性环氧树脂研究
butadiene acrylonitrile rubber
丁二烯 丙烯腈橡胶
acrylonitrile-butadiene rubber
丙烯腈-丁二烯橡胶
Study on the properties of NBR/SBR blend
丁腈橡胶与丁苯橡胶共混胶的性能研究
PROPERTY STUDY OF VINYL ESTER RESIN TOUGHENED WITH BNR
丁腈橡胶增韧乙烯基酯树脂的性能研究
testing method for extrudability of sbr and nbr unvulcanized rubber compounds
非硫化丁苯橡胶和丁腈橡胶的可挤出性的测定
Preparation and properties of acrylonitrile-butadiene rubber/ethylene-propylene-diene rubber blends
丁腈橡胶/三元乙丙橡胶并用胶的制备及性能
testing methods for synthetic rubber nbr latex
合成橡胶丁腈乳胶的试验方法
Morphology Structure and Properties of Hydrogenated Acrylonitrile Butadiene Rubber/Ultra-Fine Full-Vulcanized Acrylonitrile Butadiene Rubber Powder Blends
氢化丁腈橡胶/超细全硫化粉末丁腈橡胶共混物的结构与性能研究
CarboxilatedBuna is a general purpose oil resistant elastomer known as carboxylic-acrylonitrile-butadiene.
羰化丁腈橡胶的主要用途是作为抗油品腐蚀的弹性材料,称为羰基-丙烯腈-丁二烯。
NBR Modified phenolic molding compound
丁腈橡胶改性酚醛压塑粉
Study on Industrial Exploration of Powdered Acrylonitrile-butadiene Rubber DN214;
粉末丁腈橡胶PDN214的工业化开发研究