On the application of release agent in concrete maintenance;
浅谈混凝土养护中脱模剂的应用
A silicone oil release agent was prepared from D_4、MM, etc.
采用八甲基环四硅氧烷(D4)、六甲基硅氧烷(MM)等主要原料制备了硅油脱模剂。
A summary and different kinds of release agent both at home and abroad and mechanism of mold release as well as some common used mold release methods are presented.
介绍了国内外脱模剂的概况、种类、脱模的基本机理和常用的脱模处理方法。
Select out the Best Formula of Emulsion Paraffin Mould Release Agent;
乳化石蜡脱模剂配方选择
A kind of water - soluble mould release agent that contained lecithin was prepared, this mould release agent had good mould releasing performance, rust preventing ability and emulsification stability, it had no poisonous material and was a kind of environmental friendly mould release agent.
制备了一种含卵磷脂的水溶性脱模剂,该脱模剂具有良好的脱模性、防锈性和乳化稳定性,并且不含有毒有害物质,是一种环境友好的脱模剂。
In combination with Guangdong province Kaiping defensive tower and village culture center project,elaborate the control measures adopted in raw material,concrete mix design,mould release agent and concrete shrinkage of C50 fair concrete so as to make external wall of the project meet the quality requirement of fair-faced concrete.
结合广东省开平碉楼与村落文化中心工程,阐述了C50清水混凝土在原材料、混凝土配合比设计、脱模剂、混凝土收缩等方面采取的控制措施,使该工程外墙达到清水饰面混凝土的质量要求。
On droplet velocity distribution characters with water based die releasing agent spraying in Al alloy die casting;
铝合金压力铸造中压铸模水基脱模剂喷涂时液滴速度分布特征研究
The application of DC 3289 lubricant system to the tire vulcanization as isolating and releasing agent is described.
介绍了采用ＤＣ３２８９润滑系作为隔离剂和脱模剂在轮胎硫化中的应用及改进情况。
Experimental results show that this kind of releasing agent mainfests quite good releasing effects,with the adhesion between prefabricated components and moulds reduced and only a small amount of ash adhered.
实验结果表明，该脱模剂脱模效果好，可降低预制构件与模具间的粘附力，粘灰量少。
The paper introduced the development of heat-resistant mould releasing agent for auminium zinc diecasting.
文章介绍了耐高温铝锌金属压铸脱模剂的研制,通过对主润滑材料、基础油、乳化剂的筛选,乳化制得脱模剂。
This paper introduces the development of mould releasing agent for Zinc alloy die casting and the tribological performance of this agent,it possesses good lubricity and excellent mould releasing effect and can be used in practice taking the place of the imports.
介绍了锌合金压铸工艺用水溶性脱模剂的研制及其摩擦学性能,该脱模剂具有良好的润滑性和脱模效果,实际应用可替代进口同类产品。
The mold releasing agent must be used in traditional manufacturing technique of cores made of epoxy-glass fiber.
环氧树脂玻璃纤维引拔棒的传统制造工艺中离不开脱模剂,而脱模剂的作用除有助于芯棒生产顺利脱模成型外,由于脱模剂的种类、配方以及引拔棒形状和生产工艺的不同,对引拔棒的电气性能、机械强度也有不同程度的影响,从而给复合绝缘子产品质量带来负面作用。
A New Die Releasing Agent Spraying Technology——Pulse Spraying;
压铸脱模剂喷涂新工艺——脉冲喷涂
demolding agent
混凝土模制的水分散脱模剂
Influence of Waxes on the Properties of EMC
脱模剂对环氧模塑料性能影响的研究
If the mold spray is sticky, reduce the silicate.
如果脱模剂发粘，则减少硅酸盐。
Cork mold spray solutions have a tendency to deteriorate or ferment.
软木粉脱模剂溶液易于变质或发酵。
The stickiness tends to disappear on standing.
搁置时脱模剂的粘性易于消失。
Method Analysis on Eliminating Air Voids on the Fair-faced Concrete Surface
利用蒙脱石基脱模剂消除清水混凝土表面气泡的途径分析
In all the formulas for mold spray, a common ingredient is water.
在给出的所有脱模剂配方中，水是共用的拼料。
Clean any release agents and impurities before spraying spraying the paint on the surface.
喷涂前应清除塑料表面的脱模剂及其它杂质。
Research on Powder Release Agent for Aluminum Alloy Die Casting;
铝合金压铸用粉状脱模剂的开发与性能研究
Too much water reduces the adhesion and too little piles the material up too thick on the mold surface.
水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。
It is the usual custom for each battery manufacturer to make his own spray from materials obtained locally.
各蓄电池生产厂都习惯采用从当地获得的材料配制脱模剂。
It is difficult to set down an exact formula because cork is a natural product.
要确定脱模剂的精确配方是困难的，因为软木是一种天然产物。
Study on Numerical Simulation of Humectation Sweetening Process by Highly Active Desulfurater
高活性脱硫剂增湿脱硫过程的数值模拟
Preparation of Desulfurization Adsorbents for Gasoline and Investigation of Molecular Simulation;
汽油脱硫吸附剂制备及分子模拟探索
Study on Removing Organic Template from SBA-15 by HNO_3 Oxidation Treatment
HNO_3氧化脱除SBA-15中有机模板剂的研究
Simulation and optimization of azeotropic distillation of the solvent dehydration column
溶剂脱水塔共沸精馏过程模拟与优化
antifoaming agent, antifoamer
防[泡]沫剂,脱泡剂,消泡剂
The Experiment Study and Numerical Simulation of Multi-component Catalysts in the Selective Catalytic Reduction (SCR) of Nitrogen Oxides;
SCR多元催化剂脱硝性能试验研究及数值模拟