In this paper, the mechanism and technology of brazing hydrogenated TC4 titanium alloys were been studied according to its characteristic using three diffenent filler metals.
本文根据置氢TC4钛合金组织以及性能特点,对其进行了钎焊连接。
Effect of rare earth cerium on the microstructure and tensile properties of brazed joint;
稀土Ce对Cu-Ag-P钎料钎焊接头组织和性能的影响
Residual stresses in brazed joints of ceramic-metal heater;
金属/陶瓷发热体直接钎焊接头的应力分析
Fracture microstructures and properties of Al-Li alloy brazed joints;
铝锂合金钎焊接头断口组织与性能
Effects of Ni on the Performance of Sn2.5Ag0.7Cu0.1RE Solder Alloy and Its Solder Joints;
Ni对SnAgCuRE钎料及其钎焊接头性能的影响
Research on Brazing of Hydrogenated TC4 Titanium Alloy;
置氢TC4钛合金钎焊连接工艺研究
Vacuum Brazing of 42CrMo Steel and YG8 Hard Alloy
YG8硬质合金与42CrMo钢的真空钎焊连接
The Microstructure and Forming Mechanism of Brazing Interface of TiAl Alloy to Steel 42CrMo;
TiAl合金与42CrMo钢钎焊连接界面组织及形成机理
Interface structuce of ceramic/AgCuTi/stainless steel brazed joint
陶瓷/AgCuTi/不锈钢钎焊连接界面组织与结构
The Research on Brazing of Ti(C, N)-based Cermet to Steel and Microstructure of Brazed Joints
Ti（C，N）基金属陶瓷与钢的钎焊连接及其界面结构研究
CO_2 laser brazing galvanized steel sheets with different spot modes
不同光斑模式的CO_2激光在镀锌板钎焊连接中的应用
The Manufacturing of Filler Metal and the Joining of TiAl Alloys;
TiAl基合金高温钎焊钎料配制及连接工艺研究
openings for connections to brazed vessels
用于对钎焊容器的连接开孔
A Study of Brazing Process and Mechanism of Si_3N_4 Ceramic Using High-Temperature Filler Alloy;
高温钎料钎焊氮化硅陶瓷的连接工艺及机理研究
Research on Technology and Mechanism of Laser Welding-Brazing for Ti/Al Dissimilar Alloys
Ti/Al异种合金激光熔钎焊工艺与连接机理
This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.
介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。
Joining Strength and Microstructure of Sintered SiC/SiC Joints Prepared by Active Brazing Process
活性钎焊法连接碳化硅陶瓷的连接强度和微观结构
Bonding process of pure copper with amorphous Cu-P interlayer
非晶Cu-P钎料钎焊接头形成过程
Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.
在高温环境下,铜也表现很好,而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
Study on Weldability and Microstructure of Brazing Cubic Boron Nitride;
钎焊立方氮化硼的焊接性与微观结构
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比