The friction stir welding of 2mm thick 01420 Al-Li alloy was conducted,the microstructures,qualities of joining,and mechanical properties of the joints as well as the influences of welding parameters on the alloy were investigated,meanwhile comparing the mechanical properties with that of the joint welded by argon arc welding.
对2 mm厚的01420铝锂合金薄板实现了搅拌摩擦焊接(FSW),分析焊接接头的微观组织形态,研究焊接工艺参数对搅拌摩擦焊接接头成型和接头性能的影响,并与氩弧焊接接头性能相比较。
It also gave the reason of the crack which is produced in the splice welded seam, and madea clear summary of the practice in controlling the technical process of argon arc welding.
介绍了抛物面天线整体旋压成型的工艺过程,针对旋压过程铝板拼接焊缝开裂的原因进行了初步分析,并对氩弧焊接工艺控制过程的经验进行了总结。
The technology of microcomputer monitor system which applied in argon arc welding procedure of the manufacture of automatically activated primary Zn AgO batteries was introduced.
介绍了由微机和监视技术组成的监控装置在自动激活一次锌氧化银电池制造工艺中氩弧焊接技术上的应用，着重阐述该系统中的监控装置、焊接装置及Ｉ／Ｏ接口控制电路。
By using ANSYS,the temperature field of tube to tube sheet argon-arc welded joint which consisting of tantalum(Ta)tube and Ta/16MnR clad sheet was simulated.
利用ANSYS软件对用钽制换热管、Ta/16MnR制管板的管板式换热器中氩弧焊接接头进行了数值模拟,得到了4种尺寸组合焊接接头的温度场数值模拟结果。
Microstructure and mechanical behaviors of TiNiNb wide hysteresis shape memory alloy wire argon arc welding joint;
Ni_(47)Ti_(44)Nb_9合金丝氩弧焊接头的显微组织和力学行为
welding of tube-tubesheet
管子与管板氩弧焊接
The omglysis of welding joint performance for heliarc welding of AZ31B magnesion alloy
AZ31B镁合金氩弧焊接头性能分析
Influence about Weld Joint Property and Destruction of Aluminium Lithium Alloy by Argon Arc Welding Method
氩弧焊接方法对铝锂合金焊接接头性能和破坏的影响
The Development of the Automatic Argon Arc Welding Device's Control System of the Numerical Control Group;
数控成组自动氩弧焊接设备控制系统开发
Clinical application of argon-arc welding in prosthodontics
氩弧焊接方法在口腔修复工艺技术中的应用
Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy
铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较
Effects of laser shock processing on residual stress of AISI304 TIG welding joint
激光冲击处理对AISI304钨极氩弧焊接接头残余应力的影响
Experimental Research on Fatigue Failure of Tig Welded Joint in Aluminum Alloy Plate-Fin Heat Exchanger;
铝合金板翅式换热器氩弧焊接头疲劳断裂试验研究
Study on Electron Beam Welding and Tungsten-arc Inert-Gas Welding Techniques of Shell Made of Super-Strength Steel;
超高强钢壳体的电子束及手工钨极氩弧焊接技术研究
LAP ARGON ARC WELDING TECHNOLOGY OF THE TITANIUM - ALLOY TUBE
钛合金管路连接件的搭接氩弧焊工艺
Welding Technology of Duplex Stainless Steel Air-cooler's Shoe Automatic Argon Arc Welding
双相不锈钢空冷器管头自动氩弧焊焊接工艺
Study on Tungsten Inert Gas(TIG) Welding of Stainless Steel Welding
钨极氩弧焊在不锈钢焊接中的试验研究
Inspecting methods of porosity welded joints in TIG welding
钨极氩弧焊焊接气孔产生原因查找方法
Three welding modes ： DC pulsed TIG, DC MMA.
集直流氩弧焊，脉冲氩弧焊，直流手工焊于一体。
Three welding modles:DC TIG,PulsedTIG,DC MMA.
集直流氩弧焊、脉冲氩弧焊、直流手工焊于一体。
Research on Low-Power Laser-Tungsten Inert Gas (TIG) Hybrid Welding Technology of Mg Alloy;
镁合金低功率激光—氩弧复合焊接技术的研究
Comparative Analysis of Residual Stress in Tungsten Inert Gas Arc Welding with Continuous and Discontinuous Condition
钨极氩弧连续和间断焊接的残余应力对比分析
Comparison of fatigue properties between friction stir welds and TIG welds for Al alloy
搅拌摩擦与氩弧焊铝合金接头疲劳性能的比较