Study on hydrostatic extrusion technology of W6Mo5Cr4V2 high speed steel;
静液挤压W6Mo5Cr4V2高速钢的工艺研究
Experiments and simulation study on hydrostatic extrusion processes of magnesium alloy silk;
镁合金丝静液挤压物理模拟实验与数值模拟分析
Deformation behavior and structure of Zr base bulk amorphous alloy in supercooled liquid region by hydrostatic extrusion;
Zr基非晶合金在过冷液相区静液挤压的变形行为及结构
A real-time monitoring system is developed,which is aiming at the difficulties of controlling liquid-solid extrusion process and the key parameters.
针对液态浸渗挤压复合材料成形过程实施难度大、工艺参数和成形过程难以控制的现存问题,以PCI数据采集控制卡为核心,采用LabVIEW软件设计开发了工艺实时监控系统;实现了对工艺过程中重要参数的在线采集、显示与存储,利用该监控系统进行液固挤压复合材料实验,基本实现了对温度等关键工艺参数的过程控制;实验结果表明了该系统的可靠性,从而为真空吸渗挤压复合材料工艺的实际应用奠定了基础。
The computer simulation for liquid-solid extrusion forming process is a valid method to study on the process and the law of the change of its parameters.
复合材料液-固挤压成形工艺的计算机仿真是研究该工艺过程及其参数变化规律的有效方法。
Aiming at the features of liquid-solid extrusion process of composite,a data acquisition sofeware has been developed using Borland C ++Builder5.
针对液-固挤压复合材料成形工艺的特点,在自行开发的数据采集硬件系统的基础上,利用BorlandC++,在windows98系统平台下开发了相应的数据采集软件。
Research on Data Collecting System and Fuzzy Control Foundation for Liquid-Solid Extrusion;
液-固挤压复合材料工艺是近年来发展起来的一种复合材料成形新工艺，因其具有工序少、成本低等优点应用前景十分广阔。
Analysis on flow velocity and equivalent strain of the metal in the process of liquid extrusion;
液态挤压过程中金属流动速度与等效应变的分析
Numerical simulation of infiltration process in liquid extrusion for fabrication of Al_2O_3f /LY12 composites;
液态挤压制备Al_2O_(3f)/LY12复合材料浸渗过程的数值模拟
Using liquid extrusion to manufacture the aluminum-alloy grip, taking the place of hot die forging, can greatly increase the material utilization rate, reduce the processing procedures and lower the product cost.
采用液态挤压代替热模锻生产铝合金钳柄体 ,可显著提高材料利用率、减少成形工序及降低产品成本。
THE HYDRODYNAMIC LUBRICATION RESEARCH ON THE PROCESS OF HYDROSTATIC EXTRUSION;
静液挤压过程中的流体动力润滑研究
Technological Test and Simulation Study of Magnesium Alloy Warm Hydrostratic Extrusion;
镁合金温静液挤压工艺试验及仿真研究
A mathematics formula for the viscosity of working medium is given important theoretic foundation for HHE.
在此基础上,给出了挤压介质的粘度的数学关系式,为热静液挤压工艺奠定重要的理论基础。
hydrostatic extrusio
静水压挤压;静水压挤压;静液力挤压;静液力挤压;液力静挤压
CAD System Research of Side hydraulic Pressune Jar in Extrusion Modeling Presses Based on SolidWorks
基于SolidWorks挤压成形液压机侧液压缸CAD系统研究
The Study of Compacting Effect by Static Piling Driving and the Analysis of Measured Data;
静压桩沉桩挤土效应研究及实测分析
Analysis for the Setting and Compacting Effect of Jacked Pile in Soft Clay
软土地区静压桩设置及挤土效应分析
open center hydrostatic power steering system
开心式静液压转向系
closed center hydrostatic power steering system
闭心式静液压转向系
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
a press that is used to extract the juice from apples.
从苹果中提取汁液的挤压用具。
Identification and Control of the Process for Composite Forming by Liquid-Solid Extrusion;
复合材料液—固挤压过程辨识与控制
Research on Squeeze-Film Damping for Precision Hole Machining;
精镗孔挤压液膜阻尼理论及技术研究
Theoretical Analysis on Squeeze Flow of Electrorheological Fluid between Two Parallel Disks;
电流变液平行圆盘挤压流的理论分析
Study on Compacting Effects of Jacked Pile in Layered Ground and Its Prediction and Prevention;
成层地基中静压桩挤土效应及防治措施
Peak Ice Force in Ice Crushing on Vertical Structure;
冰与直立结构挤压破坏时的极值静冰力
Soil Compacting Problem of Jacked Pile and Research of Measures Diminishing Soil Compacting Effects;
静压桩挤土问题及减小其效应的措施研究
Study of Sinking-resistance and Compaction Effect of Static-press Pile;
静压桩施工沉桩阻力及沉桩挤土效应研究